[david turnbull]

Hi just joined and live in Newcastle NSW Australia. my HELP request relates to the power window drivers door. how do I replace the unit.
I have taken off the door trim . so how do I get to the WINDOW RAISING DEVICE. From the manual I have downloaded it appears that i need to take the door to bits: I am not all that practical in these areas but given time can follow staged steps ie 1,2,3,4,5,
hope you/some one can help-images are a great help

[email protected]

 

[sprint_veloce]

You need to unpeel the plastic waterproofing sheet to get at the regulator. Once that's out of the way it's fairly obvious but the clip that connects the glass to the regulator can be tricky if you can't lower the glass.

 

[david turnbull]

You need to unpeel the plastic waterproofing sheet to get at the regulator. Once that's out of the way it's fairly obvious but the clip that connects the glass to the regulator can be tricky if you can't lower the glass.

thanks- how do i take out the regulator? is it a matter of easing it through one of the frame holes?

 

[sprint_veloce]

Yes - it's a flexy thing so you can just squeeze it through the most appropriate opening.

 

[SCGT]

Hi , welcome to Alfaowner _?

Join Alfabook Today

 

[Greener123]

Hi :hi:

Welcome to AO :thumbs: