Alfa Romeo Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi,

Sometimes, when driving, they stop running high beam. After a while I cannot activate them. On the illumination board, the high beam lights are activated but there are none. They only work with low beam. The lever switches to high beam but they are gone .
Some advice please.
 

·
Registered
Joined
·
31 Posts
Could be faulty bulbs overheating.
Try replacing one to see if that's the issue.
If it was a wire breaking down, I would expect a fuse to blow.

Sent from my LYA-L09 using Tapatalk
 

·
Registered
Joined
·
314 Posts
If the bulbs are fine then could also be a misbehaving relay or fuse. There's a list of them in this thread (the original poster of this thread did actually have dead dip beam bulbs, but another contributor had a high beam issue):

Maybe check fuse is healthy (with clean contacts)
 
1 - 4 of 4 Posts
Top