Alfa Romeo Forum banner
1 - 9 of 9 Posts

·
Registered
'08 Brera S 2.2 (Edition no 45). Previously '12 Mito 1.6 JTDM
Joined
·
386 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
39,622 Posts
Having worked as a designer on a few lamps in my career, I think the moulds for the Brera taillamps would be very expensive to replicate. There are layers and a two-shot main lens. The original moulds may not survive either.
 

·
Registered
Joined
·
13,248 Posts
Window surround mouldings.. never seen anyone sell a new replacement, so I'm fitting just as old, manky second-hand parts that are only 5% better than the old one but half the price of a brand new one (if they existed).

Ralf S.
 

·
Registered
Joined
·
40,074 Posts
Giulietta EGR cooler covers.

In die cast metal rather than plastic.

A more robust lid assembly for the dash top compartment.
 

·
Registered
'08 Brera S 2.2 (Edition no 45). Previously '12 Mito 1.6 JTDM
Joined
·
386 Posts
Discussion Starter · #5 ·
Giulietta EGR cooler covers.

In die cast metal rather than plastic.

A more robust lid assembly for the dash top compartment.
Good shout! My 1.6D Mito had 3 new EGR cooler casings, luckily the later ones were covered by parts guarantee but clearly a massive weak spot.
 

·
Administrator
Joined
·
47,913 Posts
156 GTA jacking point covers. If he wants to go bigger - front wings.
 
  • Like
Reactions: baxter2308 and cue2

·
Premium Member
Joined
·
2,186 Posts
Those little bungs which cover each end of the sills for a 156/147/GT
 
1 - 9 of 9 Posts
Top