[easd01]

Hi All,

This morning I got in my car and started it up but after setting off I noticed the selespeed light would flash for 30 seconds or so then go off for a bit. While it's flashing I can't change gears. If I stop and it starts flashing it drops the car into neutral. Once I've been driving for a while it seems to stop happening.

I've checked the selespeed fluid and it's at max.

Any ideas?

It's a 1999 156

Cheers

 

[iainfm]

You probably need to hook it up to diagnostics to see what it's mumping about. Maybe speed sensor, but could be a lot of things...

 

[ChrisSound]

Not enough pressure be able to build up to change gear I suspect. Diagnostics to be sure though.

 

[FoxtrotOscar]

Sounds like hydraulic pressure problem; possibly pump/relay fault causing low pressure, or defective accumulator.