Alfa Romeo Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1
Boths early P3s i've have had almost an inch of gap between bumper and bonnet. Later cars don't seem to suffer presumably down to pininfarina improving build rather than age.

The bumper's been off my current one so it seems it can't be fixed by tightening anything up.

Does anyone have any experience of fixing this please?

I'm thinking ultimately it might require a late new bumper eventually - minor issue but when you're aware of it annoying.

Thanks!
 
M

·
Guest
Joined
·
0 Posts
Using washers to change the level of the bumper and also adjusting the bonnet stops is what we used to do on the 155's.
 

·
Registered
Joined
·
8,916 Posts
The ph1 and ph2 have adjusters. They are usually seized though. It took me ages to get 2 free ones to adjust mine. I'm sure the Ph3 will be the same.

This is an adjuster, I sheared the weld trying to move the adjusting bush!!!

 

·
Registered
Joined
·
8,916 Posts
With an inch gap he will have to adjust the bumper itself.
 

·
Registered
Joined
·
8,916 Posts
1 - 8 of 8 Posts
Top