Alfa Romeo Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter #1
This error has shown up on my 2.4

P2014 - flow shutter valve ( Feedback ) Signal low

What is the flow shutter valve

The fault is only recorded, the ECU received a very low signal, as it is not present it will clear but will come back after a day or so.
 

·
Banned
Joined
·
3,110 Posts
It is quite harmless failure code one side and rather nasty to cure it.
It comes from shutter valves motor electrical socket.
Actually it is needed to clean contacts there first.
But it may really happen that wires are almost broken.
Shutter valve motor is located back side engine upper starter and lower EGR.
Socket is 4- pins and orange color one.
 
1 - 3 of 3 Posts
Top