Alfa Romeo Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
233 Posts
Discussion Starter #1
hi guys just trqued the heads n my 1.7 8v engine
do i also torque the cam bolt on the head cover ?

im stuck with the wiring and putting the sway bar back n and what so as iv done a messy job and cant remember which bolt goes where if anyone could help thatd be great especially with diagrams haha
 

·
Registered
Joined
·
4,239 Posts
You mean the 4 small bolts that hold the cam box onto the head?

These just take 1.9-2.4 kgs max. Just to hold it on.

The head bolts go through both parts and hold it all together.

Be careful also with these 4 bolts as they go into an aluminium thread and can be easily destroyed. Just lightly tighten them.
 

·
Registered
Joined
·
233 Posts
Discussion Starter #3
hey brit im talking about where the cam pulley goes the big bolt that goes in the cam pulley
how tight does that have to be
 

·
Registered
Joined
·
4,239 Posts
ok the 19mm pulley bolt!

Might be 6.9 -7.4 kgs not not 100% sure. I'm at work and my manuals are at home.

Someone else?
 
1 - 6 of 6 Posts
Top