[Junit]

Hi all I'm out of ideas with my 2.4jtd 156
I have had motor control system failure on
For a few days and diagnostic says 2 faults
Egr valve and boost pressure.
I have taking egr valve off and noticed the
Previous owner blanked it off?
So I unblanked it and clean both part of the
Egr valve even tho it seemed pretty clean
Still light is on sometimes light comes off
When revs are high but not very often,
The car is in a limp mode with no turbo
While light is on does any1 have any idea?
Thank you for reading.

 

[Junit]

Ok thanks alot I will give that a go tomorrow at work
Is it a simple job? I'm not very good under engines
And the egr valve was hard enough

 

[Junit]

Thank you both for your help I have changed the egr
Solinoid with A new 1 but its from a jtdm 20v any ideas if it would
Matter? But it hasn't worked also I I'm still looking for the map sensor
But I haven't found it and run out of time... Do I need to
Remove anything first?

 

[Junit]

Ok I have taken map sensor off it looks brand new.
The rod moves in and out when key is turned and all the tubing is in good
Condition without splits.....a freind has told me it could be my boost control?
Any1 have any other ideas.. Thanks