Alfa Romeo Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
153 Posts
Discussion Starter #1
hello im after buying passager side lower wishbone bushing for alfa 156 1.6 2003 and noticed after taking the old bushing off that it would not fit because it is too loose on the wishbone in the inner steel diameter,it is the alaminuam bushing is the one Im changing,

The wishbone looks like it is the original alfa one it has the numbers 60624986 hr,
and the bushing Im changing numbers are 68898909 but my new bushing has no numbers but looks nearly the same,

and was wondering was their a difference in between the years?
 

·
Registered
Joined
·
1,134 Posts
just off the top of my head I remember reading that some of the aftermarket bushs have a metal sleave because some of the patern arms have holes that are 1mm bigger or somthing like that ;)
 

·
Registered
Joined
·
153 Posts
Discussion Starter #3
yes the bushing is around 1 mm bigger than the original,just thought that alfa might have changed the wishbones,
 

·
Registered
Joined
·
30,171 Posts
There have been several changes to the wishbones over the life of the 156/147/GT.
 
1 - 5 of 5 Posts
Top