Alfa Romeo Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,037 Posts
Discussion Starter · #1 ·
Finally got around to replacing the fuel filler solenoid this morning, pain in the ar*e to do I have to say!
Thanks to Paul G for supplying the replacement unit :thumbs:

Not sure if I went about it the right way, but I removed the seat belt anchor in the boot for 'slightly' better access
Tip for anyone else trying it, remember to pull the belt out a bit and wedge it/restrain it. That way it won't retract too much for it to be put back later...

..yes I had to remove the rear seat squab to release the other end of the seat belt :lol:


It wasn't difficult, just fiddly as you can't actually see what you're doing, rather I had to 'feel' with the fingers (Unless I'm a complete spanner and there is an easier way to do it)

Mrs. zulu no longer has to 'phone me from the garage when she tries to fill up :)
 

· Registered
Joined
·
2,988 Posts
yes agree with everything you say,I had the belt retract to much and coundt get it to work again properly so had to cut the belt unfortunatly so its a good tip for all others

extremly fiddly and no sight on what your hands need to be doing
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top