Alfa Romeo Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
248 Posts
Discussion Starter #1 (Edited)
Somebody here was interested in a manual how to install headrest monitors to your 166. Well you dont need a manual it's pretty simple. First you remove your old headrests and install the new ones. With the new headrests there will be each set of wiring which needs to be connected to the dvd through one common double cable (A jack for each monitor) that will contain within himself the power supply and the video signal. The wiring of each monitors need to move through the seat and goes underneath it. From there you have to connect the monitor wires with the special double cable. ( one for the video signal and one for the power supply) All this wiring will have to go underneath the rug and run through the ICS and into the back of your DVD player or wherever you keep your DVD. From there the cable divides into 2 different jacks. The power supply jack will go to the power supply ofcourse and the video jack will go into the video out. So basically that's all to it.
 

·
Registered
Joined
·
31 Posts
well u dont really have to change the headrests to new ones, u get the ones u have and go to a interior trimming specialist and he will flush them right in without any cables showing and without any "damage" to the leather, it will still be the same (a friend of mine with his 166 did it and the headrests actually looked better afterwards cuz he straightened out a bump created on the leather caused by hitting his head back every time he hit the traffic jam..)lol:lol:
 

·
Registered
Joined
·
248 Posts
Discussion Starter #3
Yeah but then when u sell the car someday u gotta sell with the headrest monitors then...Not really an option.
 
1 - 5 of 5 Posts
Top