Alfa Romeo Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter #1
as in the title really, ive got to fit a new oil cooler to the car and ideally need the bumper off as im fitting a non-standard Mocal oil cooler and custom Braided stainless steel lines..

help much appreciated..

(pictures are good to...)

cheers guys
 
A

·
Guest
Joined
·
0 Posts
Open the bonnet and there is a large bolt at the front on either side.
Remove them - the clips on the side are slides. Once undone the bumper should come off
 

·
Registered
Joined
·
99 Posts
Discussion Starter #3
Open the bonnet and there is a large bolt at the front on either side.
Remove them - the clips on the side are slides. Once undone the bumper should come off
these large bolts each side, are they accessed via the cut outs in the bumper by the head lights?

and i undo these, and then just slide the bumper off?! (obviously disconnecting things like fog lights etc.?)
 
W

·
Guest
Joined
·
0 Posts
That's right, two large allen bolts accessed vertically through the cut outs in the top edge of the bumper.

I had to loop a spanner over the allen key to assist as they were quite tight.:thumbs:
 
1 - 4 of 4 Posts
Top