Alfa Romeo Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi

Now almost a month into ownership, got the crank sensor fixed thanks to the great advice on here!! Driving home last night and a loud blowing, vibration type noise started under the middle of the car when setting off and accelerating. Hubby thinks a previous weld has split but was difficult to see in the dark on the drive!!

Does anyone know of a place in the Doncaster/Pontefract area I could get it checked out and possibly welded again cheaply... really dont want to think about having to fork out for a new exhaust!! do they come in sections? He thinks its the middle somewhere near the CAT

Thanks for your help... again!!

Sarah
 

·
Regional Support, For Lincolnshire - AOL
Joined
·
16,374 Posts
Yes they are built in sections so individual parts can be replaced. Check the Link to see a typical GTV system, may not be the correct one for you car but just go the Home page on the site and select the correct one.

I know one guy who fitted one of these and he was reasonably happy with it.

Cats Direct

However if the rest of the system is " tired " it may be false economy to mess about changing bits and better to go for a complete system. I had a SS Powerflow one fitted to mine, about £400 all in. Just Google Powerflow and look for agents in your area.

For example the Backbox will cost about £90 alone, I know, I priced one up, bought it and then found the rest of the system was pretty much rotten and so went the PF route and starved for a month !

There is also a place in the West Midlands that do custom SS exhausts for a very reasonable price, might be worth a trip ?

http://www.mijperformance.com/exhaust-alfa-romeo.html

PS. Do you really have a 2.0 Litre V6 ??????
 

·
Registered
Joined
·
8,918 Posts
1 - 3 of 3 Posts
Top