I had just replaced an ABS unit because of a faulty Ecu, but the main body was OK. All you would need to is replace the ECU from your unit. PM me you are interested. but let me know the Bosch unit number to confirm.
GTV 2.0 Twin spark 1996 ABS fault codes
Hi All
I have the dreaded abs light on the dash, I shorted the abs plug out under the bonnet which has given the following code 2 7 from the flashing abs light in the dash.
Anyone have a list of the ABS fault codes for the above model (Which is a phase 1)which has the 3pin plug connection or know what might be the faulty part from that number?.
Thanks
I have the dreaded abs light on the dash, I shorted the abs plug out under the bonnet which has given the following code 2 7 from the flashing abs light in the dash.
Anyone have a list of the ABS fault codes for the above model (Which is a phase 1)which has the 3pin plug connection or know what might be the faulty part from that number?.
Thanks
1 - 2 of 12 Posts
Sorry for the delay in replying. yes I had to remove the brake fliud reservoir to gain access. It is poorly designed in order to remove the ABS cover/shroud whilst it is easy to remove it is awkward to re install due to the length of the hoses.
1 - 2 of 12 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Alfa Romeo Forum
The friendly Alfa Romeo Club - If you are looking to buy or you are already an Alfa Romeo owner, join alfaowner.com today to get the most from your ownership
Full Forum Listing
Recommended Communities
