Alfa Romeo Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3,772 Posts
Discussion Starter #1
Hi guys, Ive found a set of 8c replica wheels for sale,18 inch, i have asked the seller for the pcd, all that the advert had was The spec size on the rim is 8JX18H2-41

will they fit on an 05 1.9jtd GT?
 

·
Registered
Joined
·
30,017 Posts
GT is 5x98mm PCD.
Same as 156/147/GTV/Spider.


I don't think an 8" wide ET41 rim will fit straight on without spacers either. I could be wrong though.
Tyres would be 225/40R18
 

·
Registered
Joined
·
3,772 Posts
Discussion Starter #3
thanks.. waiting on the pcd from the seller.. I dont mind having to fit spacers though
 

·
AO Silver Member, 155 Lounge Winner 09
Joined
·
7,713 Posts
agreed, that a spacer would be ideal if the offset is +41mm. mostly for cosmetics and track width. for your reference, the GT 18" multispokes are also 18x8" but with an offset of +32mm. so you may want a 10mm spacer (presuming you can't get 9mm !). but an offset of up to +35mm would be fine too.

:)
 

·
Registered
Joined
·
30,017 Posts
The seller said the pcd is 5X98, which is apparently the same for all Alfa's
159/Brera are 5x110
166 is 5x108
Mito I think is 4x100

So not ALL are 5x98


Anyway, if they are 5x98mm PCD and have a 58.1mm centrebore, then they will fit. But I still think they will need a spacer.
 
1 - 8 of 8 Posts
Top