Alfa Romeo Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
211 Posts
Discussion Starter #1
This may have been discussed before. If it has sorry. But here goes anyway.
I have bought a rear spoiler for my nearly to be delivered Giulia Nero Edition. It’s a very good quality carbon fibre one.
Can anyone advise me with what adhesive I should use to attach it please?
Pictures of my new arrival will be posted hopefully start of April.
Thanks folks.
 

·
Registered
Joined
·
943 Posts
They normally come with 3M tape and that is all you need. There are a few YouTube videos showing how to install. Spend a lot of time researching the exact position (internet photos etc) and then mark it out with masking tape, you get one go at attachment!

 

·
Registered
Joined
·
3,127 Posts
As said double sided tape, mine came with it already applied.
To fit it just peel a small amount back from an edge of each run of tape and then tape it with masking tape to the spoiler, so you can pull it when the spoiler is in place, then put the spoiler in place and once your happy with the position tape it down with masking tape and then pull the backing from the tape, it will slide away between the spoiler and body, then push it down firmly into place.
If you peel all the backing away and then position it you only get one shot to get it in the right position.
 
1 - 5 of 5 Posts
Top