Joined
·
269 Posts
As already said, that's quite normal temperature readings as long as the fan kicks in at both speeds. If it was a K series rover, then I'd be concerned above 130c but not on a twinny.
Try bleeding the radiator. Get it up to full temperature remove the expansion cap and once the fan kicks in and open the plastic screw on the top left of the radiator O/S allow it to flow freely then close and top up coolant. Job done. Chances are you'll have a little trapped air which can raise the temp in a pressurised system.
Try bleeding the radiator. Get it up to full temperature remove the expansion cap and once the fan kicks in and open the plastic screw on the top left of the radiator O/S allow it to flow freely then close and top up coolant. Job done. Chances are you'll have a little trapped air which can raise the temp in a pressurised system.