Alfa Romeo Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Type

Clutch

Status

Expired

Date Opened

09/02/2016

Deadline

16/02/2016

Detail

The problem I have is clutch fluid coming from inside my gearbox bell housing. The reservoir empties overnight. This must be the hydraulic center slave/bearing, as there is no sign of leakage from anywhere else. I have not driven the car so i expect the clutch plate to still be in good condition,so not required. The part needed to be just the slave center. Can it be done and how difficult?
 

·
Registered
Joined
·
406 Posts
Type

Clutch

Status

Expired

Date Opened

09/02/2016

Deadline

16/02/2016

Detail

The problem I have is clutch fluid coming from inside my gearbox bell housing. The reservoir empties overnight. This must be the hydraulic center slave/bearing, as there is no sign of leakage from anywhere else. I have not driven the car so i expect the clutch plate to still be in good condition,so not required. The part needed to be just the slave center. Can it be done and how difficult?
As far as I know it's a gearbox removal, as the slave is built into the inner bell housing.:depressed:
 
1 - 2 of 2 Posts
Top