Alfa Romeo Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter #1
I've been looking at the Carlack system but as I have a lot of stone chips on my black 159 would I be better using Black Hole Glaze then Carlack LLS and not bother with the NSC?
Is this an acceptable method of layering?
Will be claying first.
Thanks.
 

·
Registered
Joined
·
988 Posts
Not sure if you will gain anything. The Carlack cleaner and sealant work well together but I suspect the sealant will loose a fair amount of durability if applied over the Poorboys glaze.

It is always worth experimenting just be aware of potential bonding issues.
 

·
Registered
Joined
·
2,133 Posts
I have used the Carlack "twins" extensively over the years. I agree with lowejackson's reply above. Rather use both in tandem and then top the LLS with a wax. If you are only going to use one, then I would use the NSC and top that with something else. The NSC is a really good Acrylic Sealant.
 

·
Registered
Joined
·
357 Posts
Discussion Starter #4
Not sure if you will gain anything. The Carlack cleaner and sealant work well together but I suspect the sealant will loose a fair amount of durability if applied over the Poorboys glaze.

It is always worth experimenting just be aware of potential bonding issues.
I will use the cleaner and sealant combo but will I still need to clay or will the use of the cleaner be sufficient?
 
1 - 5 of 5 Posts
Top