[REDGAZ]

Just discovered the plastic collar on my front o/s anti-roll bar bush has been broken into two halves by the garage that recently fitted a new lower wishbone, found the two bits wedged by wishbone. I've araldited them back in position for now. Anyone had any success with this method?, probably end up making a split alloy replacement. The reason i had the wheel off was to repair the 'pad wear' wire the garage had also managed to break :rant: (If you want anything doing properly do it yourself) :tut:

 

[Rafik]

I have the same problem. I'll use hose clip and try fix tomorrow. I'll let you know:thumbs:

 

[REDGAZ]

I have the same problem. I'll use hose clip and try fix tomorrow. I'll let you know:thumbs:

Cheers Rafik, best of luck, Gaz.

 

[Smaky]

Jubilee clips will do the job, but dare I say, sears used to punt out a good split collar which held together with M4
Bolts.

This garage, up in Brum is it?

 

[REDGAZ]

Jubilee clips will do the job, but dare I say, sears used to punt out a good split collar which held together with M4
Bolts.

This garage, up in Brum is it?

Hiya, yep, in Brum. Needed vat registered chit for warranty purposes so got other w/bone done whilst in there.

 

[REDGAZ]

Cheers Rafik, best of luck, Gaz.

Done afew miles today and its still intact! :thumbs: