Alfa Romeo Forum banner

Alfa gt 3.2 stiff gear change

958 2
On my gt the gear change is slightly stiff I have read on the forum you can grease up the gear selector and the gear change improves . How can I do this is it easy?
1 - 3 of 3 Posts

·
Registered
Joined
·
147 Posts
If the battery is in the same place as the jtd, remove batt and tray(makes it easyer) the linkage is ontop of the g/box behind / below the batt, the nylon top hats dry up, cheap to replace, could just grease them but prob false ecconomy. hope this is some help, atb
 

·
Registered
Joined
·
2,267 Posts
If the battery is in the same place as the jtd, remove batt and tray(makes it easyer) the linkage is ontop of the g/box behind / below the batt, the nylon top hats dry up, cheap to replace, could just grease them but prob false ecconomy. hope this is some help, atb
Yup, the bushes are about £5 and a doddle to replace. There's a guide in the 'how to' sticky at the top of this lounge...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top