alfa badges, front rear and wheels 159
1 - 5 of 5 Posts
Joined
·
3,119 Posts
I used one of these on the front of my car, it arrived in only a few days and fitted perfectly.
http://www.ebay.co.uk/itm/251249473564?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I took it off the car to fit, 2 10mm nuts underneath then you just drill a small hole in the front of the badge so you can lever the old badge off with a screwdriver, clean the old double sided tape off with some thinners and then stick the new one on, it even has the same locating pin as the original to make sure it fits straight.
http://www.ebay.co.uk/itm/251249473564?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I took it off the car to fit, 2 10mm nuts underneath then you just drill a small hole in the front of the badge so you can lever the old badge off with a screwdriver, clean the old double sided tape off with some thinners and then stick the new one on, it even has the same locating pin as the original to make sure it fits straight.
Joined
·
3,119 Posts
This is the new badge fitted to my car
Attachments
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Swirl flaps How To and MAF clean How To anywhere? 159 1.9
Alfa 159, Brera & 946 SpiderStill working to solve problem and working through the list of jobs that should solve my 1.9Ti which is barely drivable at the moment. I'm looking for a guide or how to on checking and replacing the swirl valves. I have the black plastic type of inlet manifold and I'm not sure where the swirl...- 418
- 32K
-
Resolution · updated
-
What have you done to your 159/Brera/Spider today?
Alfa 159, Brera & 946 SpiderHi all, This kind of thread works well on several other forums I use and often sparks some great discussions / ideas. Just post up what it is you've done and feel free to comment on others posts, but be nice :lol: Today - tracking set to zero toe as recommended on here. Needed doing as it's...- 8K
- 440K
-
Pete McK · updated
-
Engine compatibility
Alfa 159, Brera & 946 SpiderHi The mother-in-laws 159 is not healthy and requires a new engine. I've been offered a brand new bare z19dth engine from an astra. Will this bolt straight in or are there any differences? I've tried searching but can't find anything concrete. The 159 is a 2007 jtdm 16v. Thanks in...- 0
- 39
-
Doctorpotford · updated
-
Alfa 159, is it a bad buy? Help
Alfa 159, Brera & 946 SpiderI've got an Alfa 159 2006 2.2 JTS Petrol. The key needs replacing and my mechanic has found a way for £450 The oil sensors have gone and it's just cost £100 to have them turned off to stop the car from being affected. There's an oil leak which is going to cost £650 apparently to fix but...- 10
- 154
-
Leoalfa159 · updated
-
Modified Brera 3.2 JTS Rebuild.
Alfa 159, Brera & 946 SpiderHopefully, this project will now start to materialize into a fully rebuilt and modified engine. I shall post some pictures as things start to come together. The first batch will be of the sump, the modifications and details of why they were undertaken. However, below are some major components...- 205
- 12K
Join now to ask and comment!