Alfa Romeo Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
3 laps into the race and I ran bearings at Zwartkops. Looking for a 2.0 twinspark engine, complete or stripped. Gonna need a good crank.
 

·
Registered
Joined
·
6,004 Posts
Is the crank not repairable? or already past that point? I had to re-polish my crank and put 10 thou oversize bearings in...

I have a crank for you, but I don't know the history of it - we can have it mic'ed up
 

·
Registered
Joined
·
80 Posts
JossTT, are you looking for a 8 or 16 valve engine? Image looks like a wide body, so 16V?
 

·
Registered
Joined
·
2,514 Posts
You may have to baffle the sump or you may run bearings again on track.

That said I had all my vehicles on track with std sumps.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #7
Thanks Gerhard, I'll contact you. Corrie, yes I agree, best to baffle sump which I'll do when the motor is out.
 

·
Registered
Joined
·
6,004 Posts
Thanks Gerhard, I'll contact you. Corrie, yes I agree, best to baffle sump which I'll do when the motor is out.
It is easy to do - just pop-rivet a plate or two onto the current plate

http://www.alfaowner.com/Forum/attachment.php?attachmentid=532626&d=1437238173

EDIT: I have put a 155 TS sump on my GTV motor - it comes well baffled already. I could not find a picture of the actual sump, but it look similar to this:
http://s1146.photobucket.com/user/nj111/media/alfazuk149.jpg.html
 
1 - 9 of 9 Posts
Top