Alfa Romeo Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter #1
CAn someone tell me are these data correct for a cf3 2.0 TS

2.0TS stock cam specs:
Intake 3-51. With variator, 22-26.
Exhaust 47-4.

So it's 234deg intake / 231deg exhaust
Overlap: 7deg/26deg


aor are these the right ones:

inlet 0/55, 25/30 235
exhaust 50/8 238

or some other data. I found so many on the internet I dont know which are the right one
 

·
Registered
Joined
·
132 Posts
Discussion Starter #3
how many types did they use? cf2, cf3...? i have data that 1.6 cams are wilder then 2.0, with more overlap. the data is really confusing since there are so many versions for 2.0.

alan, for which 2.0ts are these data from?
ps: sretno sa 156 :)
 

·
Registered
Joined
·
132 Posts
Discussion Starter #5
I only have these data for the 1.6 cams

1.6TS stock cam specs:
Intake 8-46. With variator, 22-26.
Exhaust 26-4.

So it's 234deg intake / 210deg exhaust
Overlap: 12deg/26deg

And you can see that the overlap is bigger then on the 2.0TS, which should make them wilder. But when you say you gained something I will trust you. :thumbs:
 

·
Registered
Joined
·
132 Posts
Discussion Starter #7
You are right. Because the variator moves 25°, that means that my 1.6 data are totally incorrect but they are impossible to find. I find it funny that the variator switches off on late rpm and reduces overlap, when you need more overlap on higher rpm.
 
1 - 7 of 7 Posts
Top