In fact don't really need specific colours for facelift speaker wire behind head unit if nobody can remember. What would be good is can anyone confirm if the Bose loom behind HU had different colours to std car loom.
Think I have a Bose loom as colours match the Bose loom I got with speakers and both trigger wires are populated behind hu (one in power iso) and the one on mini iso (yellow one iirc).
If I know for sure these wires shouldn't be populated on non Bose loom and\or colours are different then I can be sure I have Bose loom and try and figure out what they have done to remove Bose system. Sure car has had back parcel shelf changed at some point as I have light grey leather but car has the dark shelf that I think only came on Ti's.
I am hoping they removed amp and speakers and just connected wires together at rear shelf which makes things very easy fingers crossed anyway
I'm going to fit a Sony head unit which can show a rear parking camera display and will be using connects 2 harness adaptor.
1) I would prefer to power the camera from rear light reversing wires. ( rather than ignition live) Any idea which ones in the boot please?
2) will the connects 2...
About to install a Sony Xav az1005DB in 2010 Mito with standard cd unit.
1) I have the Connects 2 facia and 2 din mounting cage on order but I dont think I will need to change the existing din brkt in the car due to the 2din style of the sony unit. ( 2 din display but single din head unit behind...
Hey guys, so I tried long and hard (took way longer than I'm happy to admit) to run the wires and still failed with the power wire. I just could not get it through the firewall by the grommet that the hoodlatch cable and another fat harness uses. I tried looking for other places, even removed...
After a miserable time running the sub wires in my 147, I think this could help make your install a bit easier.
I used the grommet above the abs module, used by the hood latch cable and some thick harness. It is above and to the left of the pedals when looking from inside. Access to the grommet...
ok i took the plunge and bought a android radio, not advisable from china i know, these two plug ins cam with it, obviously they plug into back of unit, how do i go about attaching the wires, which to which etc, 09 159 jtdm