Alfa Romeo Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
3,229 Posts
i had mine replaced and it wsnt easy to source, you will have to get one pulled off an engine for you, try partfinder.ie remeber any 00 TS 2 litre will do, doesnt have to be from a 145.
I would also recommend sending a PM to kmacb on the octane.ie forums and also contact this lad who is very good at getting odd bits Alfa Romeo Service and repair by Don Baker Ireland
 

· Banned
Joined
·
160 Posts
If a sump from a TS 156 or 147 would suit then there should be plenty of those in scrappers. All TS engines use the same sump, be it 1.6, 1.8 or 2.o.

BUT from around '04 onwards the sump changed its shape to incorporate the drive shaft support, a feature you may not want.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top