Alfa Romeo Forum banner

1.9 Brembo upgrade

924 Views 4 Replies 3 Participants Last post by  cj romeo
I am looking to upgrade the single piston front brakes on my car to the Brembo set up, I know I will need the uprights as well as the calipers from either a ti or 2.4 but will the uprights from a Brera 3.2 4wd also fit or are the drive shafts different and also will I also need to change the master cylinder.

Also, is there a bracket available to mount the radial mounted smaller 4 pot calipers onto my uprights and with 305mm discs
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.