Alfa Romeo Forum banner
1-20 of 42 Results
  1. The Classic Alfa Romeos
    Good afternoon all I'm afraid I'm a combination of ignorant and frustrated on this Weber Carburetor issue. Having had my 2 new Weber carbs fitted a couple of years ago, it is clear they still aren't quite right. They aren't running smoothly especially at the lower end of the revs. Car is a 1988...
  2. The Classic Alfa Romeos
    If anyone is interested in a great pair of 40DCOE 32's to suit a 2000 or 1750 Giulia GTV, please let me know. I have a pair going on Ebay this evening, if anyone from the Forum is interested, they can have first dibs at the start price. They both have had fresh rebuild kits, have no spindle...
  3. The Classic Alfa Romeos
    Morning All Now I've got my 2.0L 1988 spider to start, I'm going to put an end to shelling out money on the crappy old Solexs. Apparently the Weber 40s are the carbs to have. I have also been told that: - 138 & 139 are the correct ones - and that 200 are the correct ones Questions: what are...
  4. The Classic Alfa Romeos
    Hi All, I have a problem that I can't figure out on my Weber. The rear carb is fine but on the front carb I am only getting fuel out of one of the accelerator pump jets. I have had it apart and cleaned the jet but the fuel doesn't seem to be getting to the jet in the first place. When I hand...
  5. The Classic Alfa Romeos
    hello what is the difference between weber emission carburetor (newer type) vs the old types? I know the new ones got Venturi balance adjustment screw and some other jets and emulsion tubes but is that it? can i rebuild a newer type and use the parts from a older one? like jets and emulsion...
  6. Alfa 33, Sud & Sprint
    Hi everyone I have just joined here, I don't have a Alfa car as such my car that I have bought is a Minari kit car based on a Alfasud, I believe it has an Alfa 33 1500 engine not to sure has hydraulic tappets. It had a fire in the engine and was left with fire extinguisher powder in one of the...
  7. The Classic Alfa Romeos
    What happens if one of the pump jets (including cover, washers, everything) goes missing. It looks like one of them popped itself out and went missing after my last race. Engine was running fine, but later one found a slight fuel leak, at the time had no idea where the fuel was coming from, I...
  8. Alfa 33, Sud & Sprint
    HELP!! My 33 is in need of a good lefthand side (looking from the drivers seat) Weber 40 IDF due to its original having a TOTALLY seized idle bypass screw.Anybody got one even if its a bit cruddy so I can swap guts over.HELP!!!:cry: P.S Somewhere close to Gloucestershire would be good but I...
  9. The Classic Alfa Romeos
    In the SpeedProSeries book it says yes but in the Weber YouTube vid they don't use them What do you reckon?
  10. The Classic Alfa Romeos
    I've planned this as my Christmas holiday job and thought they'd be lots of rebuilds guides but I can't seem to find one (though it may be the sherry!) Does anyone have a link to one? Also what's best to soak/pre clean them with, I found a good Alfabb thread that recommended Pine Sol degreaser...
  11. Alfa 33, Sud & Sprint
    HELP!!! Have a seriously seized idle mixture adjusting screw on one of my 33's carbs:cry: Anyone got any bright ideas?Have tried soaking it in good old WD40 for a few days and even resorted to sticking it in the oven (heat transfer etc) but it is still not shifting.Ideas people:confused:
  12. Alfa 33, Sud & Sprint
    Does anyone have any for sale? :)
  13. Alfa 33, Sud & Sprint
    Anyone on here got a good 32 DIR carb from a 'sud or sprint?Ideally with a manifold but not desperate.:D
  14. Tuning & Upgrades
    Hi all I am new to this forum so I hope I am not going over old ground here. I would like help to really understand the operation of IDF fitted to many Alfas, Porsches, VWs and other applications so that others do not have the problems I have had getting these carbs working. In fact I think...
  15. The Classic Alfa Romeos
    Hi all, I'm swapping the Solex carbs out for a set of webers, from a similar aged alfa. Everything is good except that I can't work out where the vacuum advance pipe from the dizzy should go. Any advice please? There are cream/yellow coloured caps on the RHS of both carbs and I wondered if...
  16. South Africa
    Hi everyone I bought a 2.5 V6 156 a few months ago, and I'm very happy with it so far, but it is going to need a service not too long from now. It has supposedly had a cambelt service not too long ago, but I didn't get proof of this, so I might want to get that done just to be safe. It also has...
  17. Introduce Yourself
    :confused:What are the standard main jet ,air corr jet , idle jet for Spider S4,1600cc . Thanks
  18. Alfa 33, Sud & Sprint
    For Sale. A new original old stock Weber 32DIR41 caby, Alfa P/n 18870317. This is a brand new part still with plastic plugs and covers and in the original Weber box. A$250.00 plus shipping. For a brand new carby, this is priced at less than what it would cost to overhaul your existing one.
  19. The Classic Alfa Romeos
    Ok here’s one for the tekkies, can anyone tell me what the internals should be for the Webers on a 2.0l... 105 For example........ CHOKES 33mm MAINS 125 IDLES 50 F8 AIRS 180 PUMPS 40 Your help would be much appreciated As I have to buy some new ones.......:wow:
  20. Alfa 33, Sud & Sprint
    Hi All, The sud has developed a problem while idleing. (it wont) Its fine when cold and gets worse as it warms up. I was looking at it last night and noticed that petrol is pouring out of the venturi and seems to be flooding the engine on idle. Im not up on the weber carbs (the 33 has drla40's)...
1-20 of 42 Results