uprated

Hello. I see that many of you have replaced the standard arb of some TS with the arb from a Fiat coupé 20V thats is 23 or 24 mm. Is it possible to install them on a v6 with older droplinks type ? Is it possible to upgrade to 156 v6 or gta front arb as well ? Thanks !

Hi Guys I have done a little bit of work to my 10V SW, but now i need some advice from people with clutch expereince in their cars. 2.4JTD 10 with remap, 6 speed box and a SMF. There is suspension & brakes etc, but not going into that now. I fitted a GTA clutch in August but within 2 months it...

Does any one know we're I can get uprated injectors for 1.9 v8 or what injectors I maybe able to use out of another car ?

Hi I'm looking to maybe upgrade my coil pack... Currently I have the original phase 1 yellow plugs. Has anyone done theirs and what would you recommend.

The genuine Alfa clutch in my GT has only lasted about 60,000 miles, it is now slipping at max boost in 5th and 6th gears. It has always been marginal - even when new, if there was the slightest pressure on the clutch pedal, it would slip at max boost - the remap isn't overly aggressive, but it...

I fitted uprated antiroll bars and stiffer springs on S4 Spiders with great results, and am thinking about the Alfaholics antiroll bars for my 916 now. Fitting looks a lot more involved, though, at the front end than it was for the S4. Has anybody here fitted them, and can you comment on...

Hi, I know this is going to depend on the stereo, but i'm really wanting an android touch screen head unit so I can have my reverse camera and BT streaming as well as more music storage. I would really like to keep most of the functions however. is it possible to keep any of the steering...

I bought my 2.4 Ti last October and loved almost everything about it apart from the handling. A heavy car coupled with a great lardy engine sitting very slightly ahead of the front axle didn't feel very Alfa Romeo to me (most of my Alfas have been RWD). I did a fair bit of research, coupled...

Mine is slipping. Previous owner has fitted several (4!) standard units thanks to extra torque from engine remap. I don't want to do this job more than once so looking at uprated units. Found a company on eBay selling stage 1, 2 & 3 kits. They recommend stage 3 for any remapped diesel engines...

Hi all After having the GT remapped last summer, the clutch is beginning to feel the effects of my heavy right foot...I just can't help myself at times it's too much fun! I know this topic will have been done to death on here, however things change and would rather not miss out on any new info...

I'm thinking of new suspension for my GTA. I've heard all I need to do is lower by 15mm, use Koni FSD dampers and get an Eibach anti-roll bar kit. Has anyone done this? What do you think?

I've created a new thread specifically for this upgrade test to make it easier to find and so that it does not invade other peoples posts. I sent a set of 327s to DieselPower (Dieselpower) after speaking to Yanko about his upgrade. I spoke to Lukas and he set about testing and modifying the...

Anyone know of any uprated engine mounts and bushes available to stiffen up

I have a gtb2056v from a 210hp that needs a new compressor wheel, Do you guys have any suggestions? Should i go billet? I want fast response and spool, not so much for top end power. injectors , and ic are kept stock

Hi all, I've got all sorts of clunking and groaning going on and i need (at least): Front lower wishbones (Birth is fine) Front and rear uprated ARBs (1.9JTD/Sport) - Eibach or GTA Rear trailing arms Does anyone know where would be the cheapest place to source these parts would be? It's...

My brake pad warning light came on this morning so I guess I better put some new ones on, what's best up front? Greenstuff still well liked? I'd say I'm a fast road pad kinda guy, I had a grooved disk and fast road pad set up on my Punto but I think it would be overkill on the MiTo.

Guys After a stage 3 clutch any recommendation I'm also going solid flywheel

As the title says... Anyone know where I can source these? Seem impossible to find, they're for a grande punto 8v jtdm, I'm stuck at 198bhp w/ 168whp at RS tuning, with a hybrid GT1756. 110 odd precent will do me fine Anyone?

Anyone run one of these.. are they needed / required etc. if so what make and how does it drive please used to run paddle clutches on other cars but only when standard ones gave up the ghost any need on the 3.2.. Ned what do you use on the 3.8 please

Hi guys, I had a remap about 3 months ago and I knew already the clutch was quite bad but there wasn't any slipping. Since the remap I've had pretty bad clutch slip in 4th 5th and 6th gear which is only getting worse. Anyway does anybody know of anywhere that do uprated clutches or am I best...