Alfa Romeo Forum banner


  1. Loss of torque and power after decat.?! Help

    Tuning & Upgrades
    Hi guys! yesterday have installed free flow pipes instead of back box silencer( car was remapped before this mod) and also have second cat replaced with free flow few months ago,so before installation of free flow instead of back box silencer car was more lively and more torque as well,so do i...
  2. Hub Nut - Torque Setting

    Alfa 33, Sud & Sprint
    I have had a look on various web pages etc, but I am trying to find an accurate figure for the torque for the front main hub nut. Things seem to range anything from 200Nm to 470Nm. I had a look at one manual and it said 427- 472Nm - but that just seems MASSIVE! There are a few low value...
  3. Brake Guard Bolt Needed (and torque values)

    Alfa GTV & 916 Spider
    Evening all, In my stupidity, when I was refitting the rear brake disc guards (the ones that sit behind the brake disc and have just one bolt and holes for the caliper carrier bolts), I slipped with the spanner and sheared off the bolt when it was already fairly tight... Anyone out there got...
  4. Replacement Apiro torque filter for 2.4 jtd 10v

    Alfa 147, 156 & GT
    Hi Folks I'm restoring my 2.4 JTD SW (2001) to health after a silly mechanic, while doing a service, overtightened the the nuts on the air filter lid. The lugs cracked, the lid shook free, the Maf gave up, and perhaps other things too !. 12 months down the road my wonderful 2.4 would start from...
  5. alfa 1.8ts headbolr torque procedure

    Alfa 147, 156 & GT
    , anyone have this information, or link to manual? Thank u in advance,,,
  6. torque pro fiat plugin

    Alfa Giulietta
    For those interested, there is a Fiat plugin for the Torque pro app. It gives details such as engine torque actual and multiair valve mode (very cool). 4.99 and is a direct plugin which activates these pids. I seem to have it working but haven't tested in anger yet. Would be interested to see...
  7. 1.9JTDM 16V Auxilliary Torque Values

    Alfa 147, 156 & GT
    Hi All, Can someone please help me with the torque values for the auxilliary drive belt tensioner fixing and the idler pulley fixing? Many Thanks Andrew
  8. Mito front hub to strut bolt tightening torque

    Alfa MiTo
    Evening everyone! Does anyone happen to know the correct torque for the two bolts that secure the hub carrier to the front suspension strut? I had to change both the top mounts on Mrs C's Mito today as the originals had partially siezed / collapsed. While the job itself wasn't too difficult, I...
  9. All torque

    The Classic Alfa Romeos
    I love the torquey 2l Nord but this vid puts it into perspective - about 30s in
  10. Engine Torque & Clutch

    Tuning & Upgrades
    Hi Guys Sorry for yet another question but after alot of googling i cant find an answer im happy with. I will start with listing the upgrades then the question which is 2 parts 3.0 Engine (Red Injectors) Rebuilt Ported and CR down to 9:1 Larger intake runners Larger Plenum 90mm Throttle...
  11. MiTo rear wheel bearings tightening torque?

    Alfa MiTo
    Hi. I've been trying to find out the tightening torque for MiTo rear wheel bearings. Local garage managed to break new pair of bearings somehow and i'm trying to figure out what the heck happened...
  12. Torque settings

    Alfa 159, Brera & 946 Spider
    Hi all. Am in need of some torque settings please. Am changing the air con pipe from the pump and would like to torque the fittings. Anyone able to supply these or even a link please?
  13. JTD Original clutch torque capacity.

    Alfa 147, 156 & GT
    I am considering getting a chip for 156 1.9 JTD. The increase in torque is typically 275Nm to 350Nm. Does the OE clutch stand this?
  14. front wheel bearing torque

    South Africa
    have to change bearing and my pc crashed no workshop cd and took me 30 min to get on the form with internet tv :censored: anybody know the torque setting for front wheel bearing nut ?
  15. Cam chain tensioner bolt torque?

    The Classic Alfa Romeos
    Finally worked out what the tinkling noise I've been experiencing, slack cam chain... anyhoo I've tensioned it back up using methods described here and ABB, had to help the tensioner a bit but its all nice and tight now, before I go any further can anyone tell me the torque setting for the...
  16. Flywheel torque settings

    Alfa 147, 156 & GT
    Hi guys I'm about to change the flywheel & clutch on my 1.9jtdm 16v. Having surrounded myself in a multitude of tools & car parts, I eventually got the box off all by myself the old fashion way, jacked up on stands on my drive & mostly on my 43 year old worn out back.!! Anyway I'm about to bolt...
  17. Head Gasket Torque Settings

    Alfa 147, 156 & GT
    147 Ti JTDM 150bhp CF4 engine Nearing the stage where my head is going to be re fitted after a water pump failure and ive just realised that i dont know the torque settings on for the head gasket. Can anyone help? Thanks
  18. Rear Damper Torque Settings

    Alfa 147, 156 & GT
    Hi guys and/or girls I am just replacing the rear dampers on my 147. Can anyone give me a clue as to the correct torque settings for the upper and lower bolts on the damper. I have the e-learn manual but it seems to be quite low, (only 0.822 da-NM). It seems quite low to me or I am not reading...
  19. torque settings from a 159 rear wheel bearing

    Alfa 159, Brera & 946 Spider
    dont suppose anyone knows this? ive given it a few weeks and the humming is gradually increasing, so i reckon its time for a change. still havent figured out which one it is yet though
  20. torque settings for upper wishbone

    Alfa 147, 156 & GT
    Anyone know the settings for this bolt? Cant see it in the elearn prog. Cheers