On my 2011 giu boot switch broke and i got 2016 model switch becouse it said it fits on older models bu after removing old switch it has completely different connector
this is on old switch and this is on new
does anyone have any ideas how to fit connector??
Hi Im selling a spare DNAR switch i bought new to add the race mode mod to my Veloce. I installed and confirmed it worked with 17' Giulia, but used the second hand one i bought from a QV being scrapped instead. So now mine has been working for a couple of months so now selling the spare on...
I have an issue with the switch for one of the rear windows (the one on the drivers side). when operated from the switch on its own door it works fine. But when operated from the drivers switch, it only goes down no matter if you pish or pull.Any advice?
Having just refitted my engine after an unfortunate valve bending incident, I have a couple of quick questions for you masters.
I seem to have lost the wiring connection to the reverse switch,
After refitting the sub frame I am unsure if the wiring for the the 2 oxygen sensors went...
Hopefully not a dumb question here from an uninitiated ... !
On these button-start Alfas (and probably anything else with same system), anyone know what the equivalence is to the ignition switch position II, and how to access that setting from the keyfob if at all?
Or is that a thing of the...
The fuel filler flap release button on my 166 has decided to play silly bugger. The last few times I went to fill up it had to be “wiggled” a bit to release the flap and yesterday, outright refused to comply, so I had to tug the string in the boot.
Has anyone fixed/tweaked the switch on...
I think I know what the answer is going to be on this unfortunately but I have a 2008 Alfa Romeo GT Blackline and the drivers side window switch is no longer working. I get the feeling that it is a case of keep checking ebay for the part but just wondered if anyone knew of anything different to...
1.4 16v Veloce
Reverse Light Not working
changed bulb and fuse and still not working
Next Im going to try reverse light switch.
Anybody got a guide on how to do this or even just its location and just how hard is it to do ( for someone with absolutley no car know how!! )
many Thanks in advance
My brake lights aren’t working and I’ve just changed the master cylinder...
Checked the fuse and bulbs and am pretty convinced it’s the switch - but can I find the thing?!
It’s a RHD 1750 GTV with standing pedals, I can’t see a switch under the car and can’t feel one through the carpet... the...
'02 156sw 2.0ts
I just got a charge, but the magnetic switch doesn't kick in. There is voltage to it, and the inner wheel turns freely. I don't see this as a separate part however. Is there a way to not replace the whole compressor?
My mechanic tells me I need a new ignition switch for my GTV 2001 and he has removed the faulty one, a circular plastic unit.
I have checked the EPER site here
FIAT ePER :: The FIAT Forum
and I have found a part called "starter commutator" FA 41 part number 60668391.
…..anyone know the above? Its the pressure switch near the oil filter. Eper does not say and Id rather find out without removing it to check.....but I will if I have to. Looking to fit an oil pressure gauge and need to buy a T piece that goes there to do it. My guess would be 1/8 NPT.....but...
I don't actually use the memory function much as I'm only the driver and I always use adjustment switch little bit and today I realised problems.
1. Memory function doesn't seem to be working properly. I would make beep upon long press as storing position but when I change seat position and...
Hoping someone can point me in the right direction of where to look!
A couple of days ago, I noticed that the light on the DNA switch was flickering when in 'N'. I also noticed that the backlighting on the instrument cluster was only part-working (it all works apart from a very specific part...