So I ordered a Giulia Speciale but even now I am not 100% sure on what the car does and doesn't come with. Or what the packs or extras do!
The dealers are pretty incompetent and useless. I was advised by the Giulia 'expert' (who appeared to be a 17 year old kid) that on the car I was driving...
I need some help in sourcing info on a set of used camshafts that came with my recent purchase of a damaged boxer engine.
The four camshafts, which should fit the 16V boxer engine, are all marked with “FD4” and i am wondering what specifications/profiles these have. (Cam lift Exhaust/Inlet...
I was just wondering if anyone had complete camshaft specifications for the Busso engine? I am looking for consistent details like lift, duration and lobe separation angles, preferably at either lash point or at 1mm lift.
It would be great if we could perhaps compare stock 3.0 V6 cams with GTA...
Sorry to be a bother but can someone in the know please check the specs on reg number R60MRY please It should be a Mito TCT 'veloce' in etna black with cruise park sensors and duel zone climate if the advert is correct.
It is a fair distance to travel and I would like as much info as...
I got big problem
want to order spare wheels from WSP Italty...
but I dont know will it fit to my giulietta with Brembo brakes
I wont to by 18"18" WSP Giulietta W256 7,5X18 ET41 5X110 65,1 Dull Black Polishe
ET = ???
I have not used them before as most cars i have repaired have had quite superficial damage but i need to get a slight bend in a chassis done right.
I was wondering if anyone has got a copy of the 916 gtv collision repair specifications so it is possible to do repairs according to factory specs...
I am new to this forum so I hope I am not going over old ground here. I would like help to really understand the operation of IDF fitted to many Alfas, Porsches, VWs and other applications so that others do not have the problems I have had getting these carbs working. In fact I think...
Just want to check that these are the correct measurements for the GTV - Thanks.
LOCKING WHEEL BOLTS Specifications
Thread - 12 x 1.25mm
Thread Length - 27mm
Key Head / Hex Size - 17mm
Cone / Seat - 60 degree tapered
Bolt Width - 20mm
Overall Bolt Length - 54mm
STANDARD WHEEL BOLTS...
I need a bit of help; I'm after a second set of wheels but after searching around I couldn't find specifications on brake disc and caliper dimensions. I know some of the disc dimensions off the top of my head but nothing about the calipers and I don't want to risk measuring them...
I am seriously considering an 1.9 JTDm GT, so joined this forum to ask a few questions.
Personally, I quite fancy the 170ps Q2 model. However, I find the specifications confusing in what is and isn't standard.
1) Did the 170ps version arrive in 2008? If so, are all models sold since 2008...
Ok here’s one for the tekkies, can anyone tell me what the internals should be for the Webers on a 2.0l... 105
IDLES 50 F8
Your help would be much appreciated As I have to buy some new ones.......:wow:
I'm thinking of doing something unusual with a Brera ...
Does anyone know if the 6 spd box in the Brera is the same spec across all engine choices ?
What's the maximum reliable torque they can take ? (many people have modified 2.4 diesels which might make more torque than the 3.2v6 ..)
Does anyone know the correct sizes for all the O-rings in an old R12 system used on a 164? Also, what material they're made of? Is it standard nitrile rubber or something more exotic? I'm trying to find some. Looking at some old ones, there appear to be at least four different sizes, possibly 5...
Just seen this on Italiaspeed.com:)
Alfa Romeo has this week detailed the launch specifications for the five-door Milano hatchback, the replacement for the ageing 147.
The new car, styled in-house by Centro Stile Alfa Romeo, will feature six engines, three petrol and three MultiJet...
Does anyone know if there was ever a 156 2.5 V6 specified withou airconditioning? I know in the UK all the V6s came with A/C as standard, but in anywhere in Europe was this an option? I'm trying to find a part number for a shorter auxiliary belt..
hi there guys,
are there any technical websites that people know about with specifications for the Alfa V6 engines, ideally covering the 2.5, 3.0 & 3.2 ltr. would be great if they had exploded diagrams of various parts, bottom end, head, induction system etc.
All recommendations welcome...