I have just purchased a new Valeo 3 part clutch kit from CarParts4Less.co.uk for a total of £134.19, which I thought was a pretty good price. As I have an SMF to fit when it all goes back together, this kit is for the 3.2 V6 rather than the normal one (for my car) for the DMF on the 3.0L CF2 V6...
I currently have the sub-frame and exhaust off the car and when the weather improves will fit the new Quaife diff I have purchased. The car has done ~70K miles and I am wondering if I should replace the DMF (edit) and clutch whilst I am at it. Is it relatively straight forward to drop the...
just got back from the final few mods on the GTV V6..
in total since my Purchase she has had
Alfaholics handling kit
eibach pro springs
Ferodo DS2500 front pads
it already has a stainless catback system of some persuasion that sounds good and came with...
About 2 years ago now I converted my GT JTD to the single mass flywheel courtesy of a GTA clutch I had in the garage and an Autolusso solid flywheel. The car has driven great ever since and overall I'm very happy with it. after about Eighteen months however the clutch pedal went to the...
I own a remmapped 1.9 jtd 16v 140.
I need a new clutch kit and I want smf flywheel.
I've seen 2 solutions on the forum :
- autolusso kit with standard gta clutch
- fiat 20v flywheel and gta clutch.
The standard gta clutch is it OK with the remap?
Also, what is needed to be...
Hi everyone, this is my first post here.
Anyway, I own 166 with 3.2 engine, which si in need of a flywheel replacement. And obvioulsy I want to replace original dual mass flywheel with solid mass from a GTA 147/156 model, clutch of course included.
Since it is hard to find some usefull or...
I have found your single mass flywheel conversion kit quite interesting.
How would you yourself describe drive-ability?
Have you had any customer come back and want it changed to back to dual mass?
Having read a few threads I have decided to do a SMF on my 147 JTD as my clutch is due for a change. I manage to get hold of a 20v turbo flywheel which I will get it reface and bought a Valeo GTA clutch kit to pair up. Question is would bolts from a TS/V6 flywheel fits the coupe flywheel?
Hy guys,i'm new on this forum,and i have an smAll proablem,this summer i just rebuilt an alfa 147 from scratch!i've replaced the 1.6 petrol engine whith an 1.9 jtd 8v one( lot of work,pictures and videos avaible)now on the diesel engine the fly wheel and pressure bearing it been smashed, i had...
Ive been running a 20V SFM and V6 clutch for over 10K, now im finding that the biting point is too high and the clutch will slip with slight pressure on the clutch pedal.
Reading this old tread linked below Tom mentioned "...the distance from the mounting face of the flywheel to the release...
I removed my my clutch but theres plenty of meat left on it there was a problem! the bolts that bolt the DMF where rubbing the back of the clutch plate so much its worn a grove into the back of the clutch plate! is this because the DMF was knackered???
Also i had a problem...
I'm having juddering problems and need some help with diagnosis.
Basically I had a juddering problem in all gears, from what I can tell. It felt like a grinding sensation that I can feel coming through the throttle pedal. The clutch was also slipping in 4th and 5th.
So I had a SMF...
Hi, every one would like to know whos running on single mass flywheel with jtd engine and what mileage have you done so far, as many are opposed to this conversion as it might cause damage to gearbox or other parts? as for myself i am fairly new to this site, owning alfa 156 2.4 10v jtd for 6...