Search Results for ‘settings’

Can anyone give me a guide on what's needed to connect to my car (2.4 150hp jtd) and change ecu settings on it like fuel pressure and boost pressure as well as everything else? My goal is to kind of get into these things as i have a car i can learn on. Im ready to buy a program and everything...

Hi folks, anyone know where I can get a complete list of torque settings for 147, mainly suspension related rather than engine block?

I dropped off the heads of my V6 for skimming today, following a head gasket failure on the rear bank. I'm hoping to get them back and to start the rebuild this weekend, which means I will need torque settings for various nuts and bolts. I can't see these in the technical manual - "repair...

I'm going to replace the engine mount on my 2015 1.4 MA TCT - drivers side - the one under the coolant tank. Has anyone got the torque figures for the bolts? TIA!

Hi all. I got a brand new Guilietta few days ago. And i noticed if i direct all the heat to the feet. Air still comes out from the windscreen vents. If i direct the heat to any other single direction. It works as intended. Not sure where to start with this. Any ideas? Is it possible any of...

I've got a Milano with the std audio, which I believe (according to the brochure/manual) is slightly more speakers and an improved amp, but not the HK full upgrade, which has even more speakers and a more powerful amp. I find the audio is very "muddy" and "woolly", overpowered by mid-range IMO...

I'm sure you have seen this. On new era cars like Mercs, the auto shift lever has moved from the centre console (so as to make room for more cupholders... is this a car, or a kitchen? But anyway...) to the steering column. The shift pattern goes: R N/P< push for the latter D No matter which...

Need to replace the rocker cover as it is cracked on my 2007 GT 2.0JTS could someone tell me the torque setting and tightening sequence? Cant find it anywhere

Hi all, Having moved from a Mito to a Brera one small but frustrating difference is starting to really bug me. In the Mito when you had the wipers on any setting, although most noticeable on constant, they would reduce frequency when you were stationary then revert from intermittent to...

Hello on this scorching Sunday afternoon. [emoji274] Just had the above off the car and refurbished and about to reinstall. Has anyone got access to eLearn and can check the bolt torque requirements for me please? TIA Sent from my iPhone using Tapatalk

I have a friend with a Giulia *ahem* who'd like to switch off the central locking beeps. Anyone found a handheld OBD/diagnostic reader that will let you do this? Either an all-in-one or one that works with an app. Most seem to just read error codes and clear engine warning lights. My friend...

Hi there, I am trying to find out what the torque settings are for the wheels on my Alfa Spider twinnie. Please can someone provide these for me?

The forward bushes on the trailing arm are clamped tight and therefore 'Squirm' as the arm moves up and down. But does anybody know the correct angle to set them at?

Hi am having to replace sump. Can anyone supply me with sump torque settings. Never used gasket seal before and don't want to overtighten. Any tips or things to look out for.

I have a 1.4 95bhp Mito, does anyone know what the torque settings should be so 2 bolts that hold the caliper to the carrier that screw into the 2 sliding pins, and also the bolts for the carrier themselves? And also the wheel nuts? Thanks

Does anyone know what the default setting is for the front screen on my 2011 GQV ? When I bought it it had the mileage indicator on it which counted down the mileage to an empty tank. Since then Ive been mucking around with it and its showing the radio station on the front screen and I cant get...

I am wondering what the difference is between the 3 settings for Air Recirculation. 1) All Lights off (Air recirculates) 2) Dot Light On (No Air Recirculates) 3) "A" Lit up. (What does this mean ?) Does "A" stand for Automatic recirculation or something ? Or does air get recirculated on a...

Anyone know the torque setting for the wheel bolts on a Quadrifoglio?

HI Is there a way to set date/time settinge after removing B&M Modul? I have no more the settinges in Dashboard-Menu. With the button on the lever i only can reset trips or browse throught views. Only if i install back the B&M and the original radio, i see the date/time settings in menu at...

I know this topic will have been done to death on here over the years but struggling to find the info I'm after. What are the factory camber and toe settings for a 1.9 GT? I know it's been said many times to go for less toe out, or even 0 toe. But what does the manual say? Got the GT in for...