Alfa Romeo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 59 Results
  1. Alfa GTV & 916 Spider
    hi im looking for help to replace the booster and im not able to locate one any feed back is appreciated
  2. The Classic Alfa Romeos
    Hi there, Anybody got a source for the cotton braided brake servo hose? I have tried the usual suppliers and in each case the hose stocked is too short by some 3 inches. Car is an '89 S3 US spec LHD to RHD conversion. Did find this in the USA; not preshaped but at least looks the same as the...
  3. Alfa GTV & 916 Spider
    My GTV is still in the garage awaiting a serious attempt at restoration, so I was thinking of the things on the car which need fixing. There is the steering rack/pump. The fuel gauge. The last fault is something potentially very dangerous and happened once to me before I took the car off the...
  4. Alfa 159, Brera & Spider
    Hello, There is a really strange intermittent noise coming from what sounds like behind the dashboard. It's mechanical, like something gear driven moving. It starts from right and moves to left. Lasts about a second, and then cycles from right to left again. Then it goes away for a while, and...
  5. Alfa 147, 156 & GT
    Fellas, this happened second time. Ive replaced my brake servo ((, but I think that this is a quick fix. Problem is that membrane in my brake servo gets...
  6. Alfa 75, RZ, SZ
    Hi there, My first post on here. A bought an 1988 Alfa 75 3.0 V6 last year and having recently encountered an issue where by pushing the brake pedal causes the engine to run rough. I pressed the pedal 3 times repeatedly and the engine cut out. Now every time I start the engine, it cuts out...
  7. Alfa 159, Brera & Spider
    Hi , please a realized that my servo oil is low. I need to refill but there is not tetula available , only in e-shop . Can i use Dexoll atf III D ??? Just for a moment and 10 kilometers. I have got advice that only tutera gi/e is good.
  8. Alfa 147, 156 & GT
    Hi All, Firstly many thanks again for help on replacing alternator earlier in year. Eventually found best to go in from top i.e. remove manifold plenum all electrics etc.. Alternator not actually faulty but as was in process of replacing variator naturally including cam belt and alternator belts...
  9. Alfa 147, 156 & GT
    Hi all, On cold when first touch brake pedal get a very loud whistling noise from under bonnet. Yes have checked and there is no cat in engine compartment.. noise stops when pedal released. Brakes work fine. Never happens when hot. Please don't tell me the servo needs replacing, having...
  10. Alfa GTV & 916 Spider
    Hi guys & gals, first post here. Can someone tell me where the brake servo is please. W reg GTV TS
  11. The Classic Alfa Romeos
    The rubber seal, grommet like moulding, has split on the one way check valve on the outside of my brake servo. Do you think I can find anyone with one for sale. The car is a late S2 Spider and I think the servo is an ATE part. Thought I could just pick one up easy. Few hours on the net and a...
  12. Alfa 147, 156 & GT
    I pulled a VIM from a 2.0 156 today for my 1.6. Can someone please tell me what exactly I need to do/get for it to hook up with the brake servo. Thanks
  13. Alfa GTV & 916 Spider
    Found in a box under our spare bed (of all places) a brake servo from a V6 that I think got from a forum member on here years ago (sorry I don't remember who it was) I never got round to trying it out and it's no use to me any more, so it's yours if you cover postage costs :driving:
  14. Alfa 147, 156 & GT
    Hi, My servo works only when im moving, Or when i press the gas pedal, If i stand still it doesent work, What could be the problem??? Servo pump??? A few days ago my mehanic changed homocinetic bearing, Could that take any affect on servo? Thanks for your help
  15. Alfa 159, Brera & Spider
    Hi, My servo works only when im moving, Or when i press the gas pedal, If i stand still it doesent work, What could be the problem??? Servo pump??? A few days ago my mehanic changed homocinetic bearing, Could that take any affect on servo? Thanks for your help
  16. Alfa 159, Brera & Spider
    Twice in the last week it's taken a lot of force to stop the car when braking. Pedal seems to have plenty pressure (doesn't drop to the floor) but feels like the servo isn't working - feels just like one of the old Volvo Amazons I had which didn't have a servo. First time the car was fairly cold...
  17. Alfa 147, 156 & GT
    I am installing a new power steering pump and wonder if there should be an O ring or copper washer on the high pressure outlet pipe from the pump. I am pretty sure there was an O ring when I took the old pump off but all I saw of it was when it flew into the engine bay, never to be seen again...
  18. Alfa 147, 156 & GT
    **SOLVED!**-Alfa 156 2.4 20v Brake Servo replacement?, brake pedal sticking down ! Hi Somebody help!! I have seemingly one of the worlds rarist brake problems in that my brake pedal is sticking down and keeping the brakes applied. This is happening more or less all the time during normal...
  19. Alfa GTV & 916 Spider
    Does anyone out there know if there are there any physical differences between the 2.0 ltr twinspark brake servo and the V6 3.0 servo ?. I've ordered a s/h servo for my V6 3.0 GTV and need to be sure it's the correct one. Thanks in advance. Gaz
  20. Alfa GTV & 916 Spider
    My servo fails the 'air tightness under load test', so i need a new, second hand or reconditioned servo for my V6 1999 GTV. Can't find much on the net. Dealers say discontinued. Can anyone help?, thanks, Gaz.
1-20 of 59 Results