Search Results for ‘selepeed’

Can anyone suggestwhy sometimes my selepeed will not go above 2nd gear? It just gets stuck. Leave the car for a while and it seems to reset itself!

Hi, I have a 2001 Selespeed 156 which has developed a 'crunching' sound when changing gear. It doesn't do it on every change , just when going between 2nd and 3rd and 3rd to 4th. All other gear changes are ok. I have no 'slipping' of the clutch and it drives fine apart from the crunching sound...

hi All, I have subject car but -for some reason- I bought it faulty problem is the prev.owner changed (scrapped it's original engine ECU and hired at dealer and dealer brought other type ECU -to demonstrate engine working- and I came... so there is no history about what was the original ECU and...

I have a 147 selespeed and on several occasions lately the car has got stuck in third gear in manual mode and the gearbox will not neutralise until you turn it off. If you try to put in gear after starting it stays in neutral, I have left the car for up to half an hour but you can't hear the...

Hi i just bought my first alfa two weeks back, untill not it was driving great but i noticed a bit of oil leak from selespeed looks like it was overfilled not a big issue. but now my car is goes in to neutral when i stop and after trying for few minutes it goes in first gear. also i recently...

Hi Guys this is my first post hope it helps. My wifes 147 selespeed was having motor control system fault immediately followed by selespeed fault. Tried the battery thing didnt fix the problem. I replaced the accumulator as pump was running to long. This fixed pump run time but faults kept...

Here are some problems pehaps anyone can advise and also share your experience: 1. Engine Crank Violent and doesn't fire or weak fire. 2nd try at re-start fires perfectly. - The crank sound like engine coughing badly and weak, sometimes it fires (but idle with bad engine vibration) or crank...

Hi can anyone assist me with an original 147 selespeed alloy wheel. (South Africa only!) Damaged mine in a pothole and cannot find one here in Port Elizabeth.

Hi I've have this ECU error regarding the clutch sensor position and followed the thread on how to adjust yourself. Whether I adjust the clutch rod all the way outward (I mean turning the 19mm bolt anti-clockwise) or inwards, the value in Alfadiag or FiatECU Scan does not change, always...

Hi fellow Alfa owners, my poor sele is rather unwell again:(. The problem happens intermittently which is even more annoying to diagnose. waht happens is it will sometimes shift to a gear or two above but sometimes below, so far it seems like 3rd is the most hated! Heres a list of what Ive...

Afternoon About 3-4 Months ago my selespeed pump went, was getting selespeed System failure and gears stuck in N Had Selespeed pump replaced by Ital Autos (Chesterfield) which solved the problem. HOWEVER A few days ago i walked to the car first thing to find a big puddle of selespeed oil on...

Hi to all. i have a problem with the black ball thing that sits on the actuator and i am sure its knackered. Is it possible to just replace that ball thing or will i need to replace the whole actuator. i just replaced the pump near the reservoir but still no go. When i pluged it to alfadiag the...

Sorry if this has been done to death but for what should you look for when test driving a selespeed to see if there are any existing faults ? Or is this a fools errand ? I have spoken to a few people about selespeeds, even read some threads here and the opinion is very much divided. My mate...

I know a lot of you already know this but I didn't so I've done a little research on the selespeed gearbox to find out what it does, as I've heard a lot of good and negative. Well Im pleased to say that what I found out made me feel better. Its derived directly from the Ferrari F1 gearbox, it...