screw

Hello all I have a 156 with black interior and the black screw cover on the passenger door trim (behind the internal door handle) is missing. I am slowly restoring the car and having a metal screw on show is really irritating me. Does anybody know the part number or where i can source them...

Hi all, 147 GTA. At some point I've lost one of the caps that covers the screw which holds the plastic cover on over the wiper motor. No idea what the part is specifically called and a google search has not proved fruitful. The remaining one has a small clips on the underside so not sure how...

I'm trying to get the parts together to enable the reassembly of my GTA SW. Therefore I need two of these... but I can't find them in ePer. Does anyone have the part number?

All, I’ve got a bit of a problem. I’m trying to change the discs on my Brera. Having got over a set back or two, I’ve finally got to changing the disc and now the training screw is stuck solid and guess what. I’ve stripped it. I’m going to have to drill it out. Any suggestions? Things to be...

Hi all, this morning I started driving to hear a constant scraping noise, turns out it's my undertray with only two screws left in, not sure if they weren't all put in last service or what but does anyone know the part number or a screw size I could use to replace them as I don't really want to...

I was trying to manually adjust my headlight on my preFL 147, and the hexagon screw adjuster thing fell off and sadly I lost it. There is a hole in the headlight and in the first rain its going to get bad... Perhaps some other bit got lost too but my main concern is the hole. Does anyone know...

While messing about with the idle mixture screws to get the HC down I noticed that on one barrel (twin 40's) screwing the idle mixture screw either way makes no difference to the idling, the other three do, the carbs are balanced, the engine runs sweet at all speeds apart from idle which is a...

Hi guys, I had to have the rear trailing arm, front left spring and some bushes replaced in the last weeks. The rear trailing arm had rusted through (thank god I wasn't driving when it BROKE IN HALF) and when they lifted it up and started looking around they had a field day. Broken spring, worn...

Just had a big coolant leak. Looks like it might have come the top of the hose going from radiator to engine (see pictures) - from what I've read that hole is for a bleed screw. Found what looks like the top of a plastic broken screw in a nearby cranny. I'm no mechanic, but I'm putting two and...

I'm not gonna explain the whole disassembly and function of the VNT turbo, becuse there is a whole lot of info out there. This is just about adjusting the actuator stop screw in case you want to replace your CHRA. Just a few hints though: >Bolts that hold the turbo and bolts on the turbo...

Hi I was changing oil to my 159 2.2 JTS yesterday. Everything went fine until I was taking off the old oil filter from the oil filter housing in engine bay. The filter's plastic "bottom screw" snapped from the old filter and it got jammed to it's place in a mounting hole (where it's meant to be...

My new to me GT has a trim screw cover missing. It's on the screw hole holding the trim around the windscreen. Are there any cars on here breaking for parts please or is there a good reputable breaker where I might source one. There will probably a couple of other bits I find before long so it...

I've just fitted a new exhaust system to my Spider TS. The downpipe had a blanking screw near to the lambda. I didn't check if it was tight when I installed it, which I guess I should have, as it popped out when the engine was running, luckily onto the drive. Out of curiosity, does anyone know...

As the title says im looking for the radiator bleed screw on my 159 2.4 Ti. Do i need to disassemble the front to get at it? I would love som pics if anyone has some :-)

My cooling system bleed screw above the thermostat housing is stuck. i am afraid i will strip it. Could anyone help with some ideas to try to get it loose or some other innovative ways of bleeding the cooling system?

Hi guys, Was driving yesterday then the car suddenly stopped working! Turns out that the battery terminals are very worn and despite me tightening it to its tightest setting, it was still very loose. How I managed to drive the car back and forth the last 3 days remains a mystery :chinese:~...

Hi On the process of trying to start my 1.7 16V I turned the tune screw of the AFM. I did not turn if 1 or 2 turns, but A LOT of turns and I tried both sides. So now I dont know how to solve this... I know by this site that if we turn the screw clockwise will rich mixture, if anti clockwise...

Hi all, The screw that holds the sliding compartment that houses the battery inside both of my key fobs has worn out, it feels like it has been made of a very pliable metal and the previous owner has completely worn out the head so there's is no grip. I'm worried the I have now had the car for 4...

Hi guys, doing some brake work today and saw that no hub had any of the brake rotor/disc screws to hold them in place, i see that the fronts have sheered off and the rear are missing, what size and type are they? any links to ebay would be nice. also the rear had no shims so il be doing a full...

Hi, My Engine died 2 weeks ago, and now we opened it. And we found a screw which fixes crank bed decapitated, and head was in the oil tank. I need to find new one. Whole set. But I could not find in stores. I looked to Eper Online. All I find is 7730682 or 60811055 - M12x92mm. Is it a normal...