retaining

Hi All does anyone have the torque figure for the 24mm steering wheel retaining nut? Can't get my elearn disc to load and the downloadable version is a mare to get to work. Thanks

All, I’ve got a bit of a problem. I’m trying to change the discs on my Brera. Having got over a set back or two, I’ve finally got to changing the disc and now the training screw is stuck solid and guess what. I’ve stripped it. I’m going to have to drill it out. Any suggestions? Things to be...

Hi folks. My nearside side sill on my 2009 159 ti is loose and shaking, I wonder if anyone has re-fitted this and knows the correct retaining clips or if adhesive is best? Thanks

All, I’m having some real trouble removing the two brake pad retaining pins from the front callipers. They are corroded solid. I guess the back will be just as bed when I tackle them. Any suggestions on how to remove them? Regards Simon

Need about a dozen if anyone is breaking.

So I lost the first, right hand, retaining nut when I first got the car - no biggy, the clip is right next to where it should be, and there's another retaining nut on the left. However, thinking last night, I managed to pop out the remaining retaining nut on the left of the steering wheel, and...

Hi folks, Does anybody know where I can get the retaining brackets which are fixed between the rear side of the door card and top of the map pocket. Car is an S3. Not quite sure what their purpose is but would fit them for the sake of completeness. Martin B

The gaiter on my gearstick recently came off, I got a new one (the nice black leather one with red stitching) and when replacing i realised that the plastic retaining ring thing with clips has actually snapped and the clips have snapped off with it (it's a used car) and someone else had just...

...getting my mountain bike out of the back. Yeah, I know. Still, only £4.50 delivered from Desira's eBay shop, I feared I was going to have to buy a whole chunk of trim to fix it. Strangely they're not listed as a spare on ePer for the GT, however they are listed for the 147 and Stilo, same...

Hi, Was just wondering if someone had or knows where I can find (have tried 2 breakers) 4 of the white plastic nuts that keep the boot liner attached to the bolts in the rear...... Thanks Paul

Anyone changing dipped beam bulbs on a 159 will know how easy it is to lose the retaining clip. Reading other posts on the subject it seems that the clip is only available from Alfa as part of a complete light assembly. By sheer luck I discovered that the exact same clip is available from...

I have my GT booked in this week to replace the front brake discs & pads, I am supplying pads & discs. I am giving a local garage a go(been good with other cars I have had) but its not my usual Alfa specialist. Do people think there might be any problems with removing the disc retaining bolts or...

Clumsy nuts managed to stand on one of my H7 retaining clips today, needless to say, its now made the bulb extremely loose as its lost all its shape Where can i get a replacement? Seen a complete set of clips on ebay for 12 ish

Hi does anyone know where I can get the clip/peg that holds the washer jets for the h/light washer. it fits inside the bumper to hold the jets down in the bumper. I can't even find them on the eper guide to see if they are the same on any other of the Alfa's :confused:

I st my clutch position at 28mm a week later it was 27 a month later (now) it's 13ish why does it change. My gearbox is really acting up and dropping gears. Any ideas?

Hi Was working on front suspension when noticed the disc retaining screw is missing. It has aftermarket alloys fitted (not by me). Is this an Alfa only part or can a general screw be sourced to fit. I assume it fits flush to the hub. Neil

Yes I dropped the fog light retaining clip or spring into the engine bay black hole so I'd like another one please... anyone know where these can be bought from?

Had to change a bulb tonight in the dark in the carpark at work. Unfortunately the retaining clip sprung out and disappeared. It's the main H7 headlamp bulb. I've used some ty-raps and may make up another clip using wire but does anyone have a spare clip as it would be more secure?

..WHAT A DAY I'M HAVIN!....just trying to replace the black plastic shroud that covers the windscreen washer bottle on my GTV and one of the little plastic clips into which the rather crude self-tapper screw sits has done a runner... see attached pic... anyone know where to get these? (I could...

Could someone tell me the correct size torx bit require for removal of GT front bumper pls I think mine must be worn and I don't want to knacker the heads up .many thnx Mark