Alfa Romeo Forum banner

pulley

  1. Strange noise from engine bay [2.0 JTDm]

    Alfa Giulietta
    Hi, I'm Elod from Hungary and I need some help with my Giulietta My Giulietta makes some strange noises coming from the engine bay. I can hear it only at idle and low RPMs. It is a whining (bearing??) noise maybe. After I start it up it whines. If I turn on my seat heating, or turn on my...
  2. Brera 3.2 Crankshaft pulley and timing cover removal.

    Alfa 159, Brera & 946 Spider
    Evening, I’m stripping my engine bay to get to my timing chains, with the engine still in. Got down to the crankshaft pulley and finding it really hard to get off using a 3 arm puller after removing the crankshaft bolt. Has anyone got any ideas on how to get the pulley off? Also, I removed...
  3. 1.9jtdm grinding noise when AC is on

    Alfa 159, Brera & 946 Spider
    Hello, alfa owners! I am a bit concerned about my 2006 159 1.9jtdm 16v and the fact that some mystery noise comes on when I turn on the A/C. The noise can only be heard at low speeds and is relevant to the engine RPM which leads me that it is a pulley. I have had the car checked at the local...
  4. Crank pulley bolt torque?

    Alfa 159, Brera & 946 Spider
    I'm hoping to fit a new ribbed belt crank pulley (TVD) to my 2.0JTDm this weekend...I say hopefully as I was supposed to have the part last Tuesday via a 24 hour courier ....several stroppy emails later and I still don't have it! Anyway....assuming it comes does anybody know the correct torque...
  5. 2.4 Crankshaft Pulley Life Expectancy

    Alfa 159, Brera & 946 Spider
    I have no idea if the pulley on my car was the original one or not but it failed in May 2017 and was replaced by my local garage (with a non genuine one they supplied) at 91500 miles. Tonight that one failed, fortunately no damage to anything other than the pulley, lots of smoke! Mileage now...
  6. 1.9 jtdm crank pulley updated design?

    Alfa 159, Brera & 946 Spider
    Been trying to source a replacement crankshaft pulley for my 1.9 jtdm. I've tried euro car parts and now ebay and they're both different. My original one has a recessed centre whereas the new one has a solid centre. I think the original bolts won't be long enough. Should I just fit it with...
  7. V6 Crank Pulley (not the nut!)

    Alfa 147, 156 & GT
    I’m changing the cambelt on a 3.0 V6 - it’s actually on a GTV, but its the same problem on any of the V6s. I’ve got the nut off, no problem, using an electric impact wrench. The washer was there and is off too. But the pulley stuck solid - it won’t come off. So far I’ve used: - plastic...
  8. 159 1.9JTDM Crankshaft Pulley

    Alfa 159, Brera & 946 Spider
    Hi all, I am in the process of renewing the timing belt on my fathers 2007 159, 1.9 jtdm and the lower crankshaft pulley has seen better days. It is one of the older pulleys pre 5344781. I have fished out my old pulley from 2009 SW and apart from the length of the ribe bolts used to secure the...
  9. Wanted - gtv6 crankshaft pulley or 75 v6 flywheel and pulley

    The Classic Alfa Romeos
    Apologies for the cross-post but thought I might as well cover all relevant forums. Unfortunately I've found the crankshaft pulley on my 3.0 v6 12v rebuild is cracked, so need to replace it. Ideally I'd like to grab a matching pulley / flywheel set from a 75 3.0, but a 75 2.5 would do the job...
  10. Wanted - gtv6 crankshaft pulley or 75 v6 flywheel and pulley

    Alfa 75, RZ, SZ
    Apologies for the cross-post but thought I might as well cover all relevant forums. Unfortunately I've found the crankshaft pulley on my 3.0 v6 12v rebuild is cracked, so need to replace it. Ideally I'd like to grab a matching pulley / flywheel set from a 75 3.0, but a 75 2.5 would do the job...
  11. TS Lightweight crankshaft pulley

    Alfa 147, 156 & GT
    I tried posting in Modified section but no response to original thread. I would like a TS Lightweight crankshaft pulley asap but have been unable to find Sotos on Facebook or Ebay ? Quote: Originally Posted by Kasperhog View Post Contact the seller on Spanos Engineering at Facebook. Got a...
  12. Crank pulley bolt brera q4

    Alfa 159, Brera & 946 Spider
    How the hell does this bolt come undone on the q4 brera. Is this definately a lefty loose???
  13. Bottom Crank pulley?

    Alfa 159, Brera & 946 Spider
    What is the general consensus on the life span of these bottom crank pulleys (rubber insert type)? I’ve seen a few stories of late of these failing but it has been on cars with around 130k+ Anyone had one fail early in life?
  14. Crank pulley - which should I buy?

    Alfa 159, Brera & 946 Spider
    Yes I have tried the search option but as usual it tells me there are no threads on the subject, so! Have a 2007 Brera 2.4 JTDm and upon start up have the awful squeal from belt area and know that it's something in my aux belt and alternator belt area. Decided to do a brand new install and have...
  15. size bolts for crank pulley?

    Alfa GTV & 916 Spider
    while the shop diagnosed my engine they forgot to add back the crank pulley and bolts + valve cover bolts does anybody know size bolts for crank pulley? i see 6 small bolts. not sure what size or type they are. m5 m6? 10mm? 15? 20? also i would like to know the size for the valve cover bolts, i...
  16. Struggling with exhaust camshaft pulley

    Alfa GTV & 916 Spider
    Am really struggling with this one. Can't get the bolt to budge at all, even used an electric impact on it with no success, please tell me it's a normal lefty loosey bolt?
  17. Crankshaft pulley DPV1002

    Tuning & Upgrades
    Looking for a replacement pulley for my V6 veloce but can't find one for less than £135... seems a little expensive to me and just wondering if anyone no's of a cheaper alternative part as Alfa don't make them any more? Also can anyone confirm that it's held on by a 41mm nut? Many thanks
  18. V6 Idler Pulley, where does it go?

    Alfa 147, 156 & GT
    Hi, this is my first post. I bought an Alfa V6 2.5 24v engine from a 156 with a view to tune slightly and add to a track car that I'm building. The engine was in a very filthy state when bought and have spent some time cleaning it to a moderate standard and am now in the process of rebuilding...
  19. Ac pulley

    Alfa 159, Brera & 946 Spider
    trying to track down any store that sells just the pulley and bearing. Any help appreciated😊
  20. 1.9 jtdm alternator pulley for sale

    Alfa 159, Brera & 946 Spider
    I have an as new over run alternator pulley for sale. Bought it as I thought mine was faulty but it turned out to be the alternator itself. Was fitted for just a few minutes then removed again! £30 ono.
Top