Search Results for ‘powerflex’

Hi, I've upgraded the rear anti roll bar bushes to powerflex, but the problem is that the whole anti roll bar moves left and right (when you pull it with your hand to the side). This didn't happen on the old rubber ones and it was quite a big problem to even turn the anti roll bar in them. Is it...

Hi, Does anyone have any recent experiences with the powerflex rear engine mount sold by Autolusso (The one that bolts into the subframe)? I recall reading some threads last year which commented on a few issues with the design but I believe these have now all been resolved so keen to hear from...

I'm getting started with a complete rear suspension rebuild - mostly with new parts. I'm currently trying to fit the rear ARB to the subframe with new Powerflex bushes. The problem is the lip of the bush on one side prevents me being able to bolt the stays on. (See pictures). I'm thinking of...

Hi there, I have a 2009 Brera S-V6 and I am looking at upgrading the bushes, probably going to buy them from Autolusso Front Anti-Roll Bar Bushes - either 22mm or 24mm diameter bush if anyone knows which will fit my S-V6 2009? - powerflex website states that the 24mm will fit “Ti vehicles with...

Hi... Having issues with my Brera TBI (2010) suspension, (knocking when going over bumps at low speeds) :grumpy: Thinking about upgrading to Powerflex Bushes, has anyone upgraded, using Powerflex Bushes? Thoughts and suggestions please. :scratchchin: Thank you.

Hi, Has anyone fitted the Autolusso developed Powerflex Rear Engine Mount on a GTV 3.0 ? Looking to get one as I'm sure my original is knackered contributing to one of the flexi pipes breaking at the joint. Having real trouble trying to find originals and the eper diagrams don't inspire me...

What are the experinces for replacing the original lower front wishbone rubbers by Powerflex? Is it worth the extra money and what is the advantage, and possible disadvantage? The original ones are to be replaced and I'm looking for input and advice. In general I'm aiming to keep my 147 GTA as...

I am considering using these on my 159, obviously there are a lot of bushes front and back and was after some advice. which bushes would you do, i dont want a harsh ride just want the tyre wear on the front to be more even. I have heard stories of them squeaking, which is something I...

Hello Guys, At the ADMIN's, if I posted this in the wrong section, my apologies, it wasn't intentional. Since my 159 Q4 has gone to another owner (new work, new car from my work and no spare time anymore to spend on the car), I have the complete Powerflex Black Series set for the rear...

Managed to remove the old bushes out of the lower arm rear bush housing,took them and the powerflex down local place to press in but they reckon they won’t be able to get them in as not much give in powerflex bushes. They were worried about damaging the housing? I know there isn’t much give but...

As more people on here know this is a very popular modification we have been doing for a couple years now we exellent results. This helps prevent the front tyres wearing on the front inner edges and make the car drive much better. There is a video on our web site to demonstrate the issue with...

As most of you know we fit loads of the Powerflex lower arm bushes we developed and they are massive improvement and help with the tyre wear on the inner edge of the front tyres We are also now doing the rear trailing arm bushes as these are starting to show their age and the rear trailing...

We recently submitted a thread regarding the rear Powerflex bushes for the Giulietta http://www.alfaowner.com/Forum/alfa-giulietta/1096937-autolusso-powerflex-rear-bushes-for-giulietta.html Here is a list of part numbers and locations for the Giulietta we are working on with Powerflex I...

Hi all, anyone has the powerflex pu bushes installed in their MiTo? Does the ride get too harsh, how much do I have to pay for installment and do you need to realign the wheels? I am considering the rear bushes and the two ones for the front wishbones.

We have been working with Powerflex to produce a replacement bush for the trailing arms on the Alfa Romeo Giulietta models as the bushes are very soft as standard and often have play. This bush can’t be bought separately from Alfa so replacing this would normally require a complete arm at the...

Old bushing knackered. New arm costs muchos dolares. So new bushing fitted. Part PFF1-820

Hi guys, Has anyone had one of these fitted? If so does it make much difference?

A couple of years ago I had my 2001 Spider's rear end bushes replaced with blue Powerflex ones. The car is getting through a pair of rear tyres every 4 months! I have had a couple of balljoints replaced on the back recently. The car "skips" when it hits a bump. I live on the Isle of wight...

Hi guys :) turns out my lower front wishbone the bushes have gone. Do you reckon it would be worth going for a powerflex replacement or should I get a regular wishbone? If it's worth doing where do you guys source them? Thanks :D

what do you think about changing the bushes to powerflex?