Alfa Romeo Forum banner

nut

  1. Nut spec for upper control arm bearing?

    Alfa 159, Brera & 946 Spider
    Hi all, I had the an issue with my upper control arm nut, that it kept spinning in place and I had to use a dremel to cut it off! But now I don't know what nut is required! Does anyone know what spec nut is required for the upper control arm ball bearing?
  2. Wheels nut lose!

    Alfa Giulia
    I hadnt driven the Giulia for a while and the other weekend went out in it. I got to hear a slow moving rotating noise which I thought was a slightly corroded disc, which should clean up. But no it didnt so yesterday I drove the car to work with more stop start and slow manoeuvring. It then...
  3. Alfa Nut Montreal video!

    The Classic Alfa Romeos
    Hi everyone, it took me 40 years but I finally managed to get a drive in a fabulous 1974 Montreal!
  4. Steering wheel retaining nut torque

    Alfa 159, Brera & 946 Spider
    Hi All does anyone have the torque figure for the 24mm steering wheel retaining nut? Can't get my elearn disc to load and the downloadable version is a mare to get to work. Thanks
  5. Alfa Nut long term GT review

    Alfa 147, 156 & GT
    Hi everybody! I hope you are having a good week so far? For all those of you who requested a special video on the GT - it's taken a while but here it is!! Hope you enjoy and don't forget to subscribe to my channel and like of course!
  6. Alfa Nut drives the Giulia QV!

    Alfa Giulia
    Hi Folks! Finally managed to get my hands on a Giulia Quadrifoglio Verde this week and yes, it was worth the wait! Take a look here and please don’t forget to like and subscribe. Comments welcome too! ����
  7. The Alfa Nut 1974 GTV 2000 feature!

    The Classic Alfa Romeos
    Hi folks, I'm having a bit of nostalgic fun in this weeks episode - whilst hooning around the lanes in an immaculate modified 1974 GTV 2000! Next video will feature a similarly immaculate restored '74 Montreal :party:
  8. V6 Crank Pulley (not the nut!)

    Alfa 147, 156 & GT
    I’m changing the cambelt on a 3.0 V6 - it’s actually on a GTV, but its the same problem on any of the V6s. I’ve got the nut off, no problem, using an electric impact wrench. The washer was there and is off too. But the pulley stuck solid - it won’t come off. So far I’ve used: - plastic...
  9. 916 Spider Alfa Nut vid!

    Alfa GTV & 916 Spider
    Here you go folks - on topic this one I think? :wink:
  10. The Alfa Nut

    Alfa GTV & 916 Spider
    OK so not strictly GTV / Spider related but I think we can all identify with this. Plus he does own a Spider. Own up who is it?
  11. Lost wheel locking nut

    Alfa 147, 156 & GT
    Hi, looks like a mechanic lost my wheel locking nut when it was last in, how do i get a new one or is it possible to remove the wheel without this?
  12. Drive shaft nut size

    Alfa 147, 156 & GT
    Hi I need to take my gear box as I'm changing my clutch and I don't know the size of the nut and I'm struggling to get the passenger drive shaft out as well any tips ?
  13. Locking Wheel Nut Key Broken!

    Alfa 159, Brera & 946 Spider
    Hi, Just wondering if anyone can help. A tyre shop has over tightened my locking wheel nuts, and when i have gone to go and change my brakes today the key has snapped inside the locking wheel nut. Does anyone know how to remove these?
  14. New to Alfa. Long time classic car nut.

    Introduce Yourself
    A friend has a 2008 Spider and I am smitten! I would like a 3.2 but UK annual tax is £550. Is the 1750 good?
  15. Mikey Italian car nut

    Introduce Yourself
    Hi to all memebers I,m new to this post.But not new to alfa cars I have a 58 & 60 spyder. The 60 is a parts car and 58 I,m restoring. Hope I can get some info. when the time comes. Tks. Mike
  16. 164 real wheel hub: nut size & caulking

    Alfa 164 & 166
    Hello, I'm going to replace one of the rear wheel hubs on my Alfa 164L in a few days. According to my shop manual (CarDisc), the 7th step is "Remove caulking and the hub securing nut" after the wheel hub cap is removed and I also should caulk the hub securing nut after I tighten it during...
  17. Locking wheel nut snapped

    Alfa 159, Brera & 946 Spider
    I changed discs and pads yesterday, tightening the last locking nut up ( not over tightening by the way ) , wheel nut key snapped on the inside! Wheels are now on wirh locking nuts but if I have a flat in stuffed How do I get round it? Will welding a bit to the lockers and twisting it off do...
  18. Lost locking wheel nut key

    Alfa 147, 156 & GT
    Hi all, I managed to lose the locking key on my other half's 2006 147. The key code is 275, and the shape is an 8 point star. Anyone know where to get these replace? I've heard Evo Automotive sell them but the website doesn't even ask for what car brand. I've shot them an email but didn't...
  19. Drive shaft nut

    Alfa Giulietta
    Hi guys in an attempt to ensure I have the right tools at hand before I start would anyone have the size of the drive shaft nut on a 1.6jtdm model and the tightening route?
  20. Locking nut key code wrong.

    Alfa Giulietta
    I need to take my wheels off for a new wishbone to be put on problem is my locking key is missing so I ordred a new one with the key code supplied in the box turns out the key sent is more of a star and the bolts on the car is more of a hexagon so I’m guessing maybe the bolts on the car are...
Top