I have paid version Multiecuscan and it connects to 159 1.9 jtdm 16v Ecu through elm adapter fine but recently I had my injectors rebuild and now I have to recode them. It looks like I can accomplish that only through kkl cable. And if I understand correctly than without...
Hi all, car is 2.4 159 2008
Menu button is broken and I'm trying to avoid fixing the stalk for the time being.
I've read on here that you can set the time with multiECUscan but for the life of me I cant find the setting. Which unit do I connect to? Can anyone help me?
Thanks in advance
I have had my 159 1.9jtdm tiSw for nearly 8 years and have not needed to post much on here, however since deciding to sell the car it's bitten back! I survived the 8 years with only one key with no problem until 3 weeks ago when it failed.
I managed to get into the car and remove the alarm...
I haven't used MES for ages (since I had a GTV a few years ago) and I need to do some diagnostics on the climate control on my 147. So today, I updated the software, paid for the licensed version and dug out my old cables to try and get it working.
I tried with an ELM 327 cable first and after...
I have a rough idling problem with my 159 1.9 jtdm. Today I checked its fuel pressure regulator with multiecuscan. And I recorded its video and upload it (its link below). as you see in the video, while idling, pressure regulator's graphic is like zigzag. I guess it must be near and also...
Hi Guys, if any of you are after a Multi ECU Scan hardware bundle i'm selling mine.
You can use it with the free software. I might be able to sell my license i brought for the software i'm not sure, i'll look into it.
It can be used on VAG cars too (the...
Hi Alfa buddies.
Recently had a check engline light pop up on my alfa giulietta 2.0 JTDM. 10 or so starts later, the light disappeared and then returned not long later. This happened a few times until I managed to purchase ODB ELM cables and MultiEcuScan. For the past few days the check engine...
My cable arrived this morning and for the life of me i cant connect to the car.
Keeps coming up "Error 'Port 1' does not exist".
Laptop is not new but running win8. As the title states, i downloaded MultiECUscan 4.4 free version
Hi need help. Anybody in yorkshire with thd ability to read codes for beer tokens? I dont really want to spend £60 cheap git ha!
Alternatively ive seen a cheap £16 version of the one cable on ebay, are these any good?
The question concerns the AR159 1,8 MPI engine.
The engine ECU is Siemens VDO injection (1,8)
In the MultiEcuScan (version 2.2) parameter's menu, there is a parameter "Electric fan control [%]"
What is it's meaning?
I'm sure, that it isn't related to the radiator's fan.
Just noticed there's a new version of MES, V 4.3
At first glance not much new for giulia/stelvio , one feature is that WiFi is now suported for Cantiecar MPX interface.
01/12/2018 - Multiecuscan 4.3 Download
- Added information for more ISO codes from 2015-2018 vehicles
- Added support for...
Does anyone know the intricacies of the ecu set up with regards to passenger door nodes. I have attached Elm 327 (modified cable) to my 159 teamed up with multiecuscan.
The passenger door unit comes up as inactive and with a connectivity error. If I do a proxy alignment (on the occasions...
Selling my MES cable set as the G has now gone
I purchased from Gendan as part of the MES software package for £100
Obviously i cant sell the license but i can move the cables on
OBDLink SX cable and Yellow adapter included in the price
The software is around £50 so ill let these...
I've noticed that quite a few people have exchanged their ABS units. Is it mostly because Multiecuscan can't communicate with the ABS?
I've found that the free Multiscan 3.2 can activate the ABS mechanics using the normal switchable VAG-KKL cable. Versions before that can't. Anybody else notice...
I recently updated Multiecuscan from version 2.2 to 3.8 and now I can't seem to connect to any modules anymore other than the main ECU. I used to be able to connect to everything such as service interval, abs, airbag, steering lock but now all of those give a "ELM32 -> ECU connection...
I have misplaced my OBD2 USB KKL VAG COM interface and green/yellow/red adapters :disappointed:
Have searched high and low for months now but no luck, so I'll have to replace them.
It's a good while since I bought these so I'm wondering if there is anything updated that I should...
Just received my replacement Airbag ECU and I'm being warned to disconnect squibs before continuing to check for faults.
Is this really necessary?
The replacement is still not putting the ECU light out so I'd like to check what faults the ECU has and if they can be cleared before contacting...
I've recently purchased the multiplexed version of the MultiECUScan software- it means no adaptors (except for early 3pins).
I've tried it on my 156, and it worked fine.
I also tried it on my Brera, but doesn't seem to connect; now this could be because of the fault - Vehicle...