Alfa Romeo Forum banner
mounting
1-20 of 109 Results
Advanced
  1. Alfa GTA
    Hi, after 3 years without an Alfa, i’ve bought a 147 GTA. Absolutely love the car. Got a small problem, one of the bolts securing the handbrake handle has come loose and fallen out. To put a new bolt in does the exhaust and heat shield need to come off?
  2. Alfa 147, 156 & GT
    It produced a noise but I only noticed it after changing a rear ARB link. Believe it or not, the faulty part is on the left in the pic. Look at the centre recessed plate/washer (coloured silver). I am holding it out as it had become unbonded from the rubber and could move vertically by around...
  3. Alfa 159, Brera & Spider
    I've noticed that I'm missing one of the bolts for the gearbox support. It's one of the ones that screws into the aluminium casting labelled 1b in the image. Where can I possibly source a replacement? The manual suggests it's an M12 but declines to offer any further detail.
  4. Alfa GTA
    Hi all, I am looking for a set of engine mounting bolts. The new mounts apparently do not come with the actual bolts, and I need to reuse the existing, which I do not want to do. Anyone know from where to order new bolts?
  5. Alfa 147, 156 & GT
    I have seen in the past a couple of posts where members have attached a wheel to the TS O/S front lower engine mounting for ease of use during removal and installation of the engine. I wanted to do the same with a spare mounting I have but I am unable to unscrew the bolt that is attached to...
  6. The Classic Alfa Romeos
    Hi, can someone please advise the best way to replace the rear gearbox mount on a 1982 gtv , thanks for your help, cheers.
  7. Alfa 164 & 166
    Hello! I'm wondering if anybody did this to his Alfa. I saw a video in YT **https://youtu.be/o9S7hwud7Og**, and at 1:11 you can see this guy have an MP3 Player installed at the driver legs. I want to install a subwoofer, I have it already, with the Radio MP3 Player and the amplifier, now, how...
  8. Alfa 147, 156 & GT
    The back mounting from my JDT engine cover (the rubber washer with the metal sleeve through it) is missing and I can't find anyone who sells them. Would someone on here have a spare that I could purchase please? Thank you. Derek.
  9. Alfa GTV & 916 Spider
    I’ve had a search around and can’t any information on this. I’ve just fitted a more period Clarion radio cassette to my car, which came with a 6 CD Clarion autochanger. I’ve got it up and running (tapes still sound good!), and have run the cable from the head unit as far as the cubby behind the...
  10. Alfa 159, Brera & Spider
    Does anyone know where I can get the offset mounting plate/assemblythat the front number plate sits which in turn is fitted to the front bumper. Presumably these are the same for cars with similar bumpers such as the Brera and 159?
  11. Alfa GTV & 916 Spider
    If anyone has a front exhaust mounting bracket for a TSpark, please can you get in touch. NOT the ally bridge thingy on the sump but the dodgy mounting behind which stops the pipe from sagging onto the bridge thingy. None of the usual suspects list it or any of the individual bits, which is odd...
  12. Alfa GTA
    I am writing to you with a question concerning KW Coilovers V2 (it is valid also for V1 & V3). The upper mounting hole in rear shocks is oval (photo attached) - this means that rear wheel camber can be adjusted. But there is no info about it in KW V2 instruction manual. KW provides the same KW...
  13. Alfa 159, Brera & Spider
    Does anyone have a set for 159 SW without roof rails they no longer require? Many thanks Kev
  14. Alfa GTV & 916 Spider
    hey guys, I need a picture of the front bolt mounting of the front left wheel arch liner so i can mimic it and not get rubbing on my car.
  15. The Classic Alfa Romeos
    Has anybody used the poly mounting inserts sold by eb spares. I find my spider gearstick moves a fair bit on acceleration and deceleration and presumably these would stop this. I've had a quick look underneath and the mounting doesn't look obviously worn. Would stiffening up the gearbox support...
  16. Alfa Giulietta
    Can anyone tell me please: under the front numberplate plastic mounting plinth, is the bumper a smooth curve, or is there a smaller, 'Italian numberplate'-sized raised area as part of the bumper moulding, like there used to be on older Alfas?
  17. The Classic Alfa Romeos
    Any good suggestions on where to mount a facet electric fuel pump on a 105 coupe. Advice from Alfaholics is vertical, below the tank level and just in front of the tank but unless I'm missing something I cant see anywhere obvious. Any advice and ideally a photo would be very much appreciated...
  18. Alfa Giulietta
    My satnav , and many other screen mounted ones, tend to obscure too much of my view, and I hate wires hanging around, so- One old plastic handled chisel, one Belkin screen mount with flexi arm, one usb 12v lighter socket, plus original screen mount for the satnav. Shaped the chisel handle to fit...
  19. Alfa 147, 156 & GT
    Hello to all. We are a newbie here and this is our first post. We have an ALFA 147 JTD, 115BHP, 1.9 JTD. It has a very annoying rattling noise from over near the timing belt/auxillary belt area which we have been unable to identify. At the moment we are looking at the engine mounting, which...
  20. Alfa 159, Brera & Spider
    Hi Guys, Has anyone hard mounted and wired a phone mount in their car if so where did you mount it (pictures would be great).
1-20 of 109 Results
Top