Alfa Romeo Forum banner

lower

  1. Alfa 156 Lower Wishbone Alignment Help!

    Alfa 147, 156 & GT
    Hey Alfisti, Long time reader, first time poster here with what is probably a super simple issue to solve. I had a gear shifter cable end snap on me, so I had to drop the shifter/handbrake tunnel to get the new cables in. For whatever reason, a previous owner/mechanic had installed the front...
  2. Lower dog bone engine/gearbox mount.

    Alfa Giulietta
    For the 2nd time we are having issues with the dogbone/gearbox mount on our G. It is a rubbish design, the hole inside the large end which fits into the subframe is larger than the bolt which goes through it and the mount relies on the clamping force of that bolt to stop the mount moving...
  3. 2.0 TS imperfect throttle control, slightly jerky at lower rpm.

    Alfa GTV & 916 Spider
    Since I have my car it never behaved right. Facts: - new Marelli AFM since yesterday - car became even worse ( I am not sure if it was necessary - the new unit reads very different values than MES gives as target, just like the original BOSCH unit did, it reads ca. the double amount of air . In...
  4. Radiator lower support bracket

    Alfa 164 & 166
    Radiator lower support bracket on my 166 v6 is badly corroded and I can't find a new or decent secondhand one. Noticed in another post GazzaF15her talked about making one!!
  5. 156 2.5v6 lower control arms

    Alfa 147, 156 & GT
    I am in the process of replacing my lower control arms and cannot get the mounting bolts to line up. It appears the bracket is half a hole too short. Trying to line it up with a screw driver does not work as it wont move far enough to line up. I did order 147 arms by mistake but i thought they...
  6. For Sale : Pair of TRW Lower Wishbones for 156/147

    Alfa 147, 156 & GT
    SOLD : Pair of TRW Lower Wishbones for 156/147 Now that sadly my 156 V6 has gone to it's new owner I'm having a bit of a garage clearout. This is a pair of TRW lower wishbones. They are brand new and have never been fitted. (Note, I have taken one of them out of the bag as I needed the bag...
  7. 156 TS O/S front lower engine mounting

    Alfa 147, 156 & GT
    I have seen in the past a couple of posts where members have attached a wheel to the TS O/S front lower engine mounting for ease of use during removal and installation of the engine. I wanted to do the same with a spare mounting I have but I am unable to unscrew the bolt that is attached to...
  8. Giulietta lower grills upgrade

    Alfa Giulietta
    Does the lower grills from the facelift mount on older giuliettas? They look the same but not sure if it would mount without any issues as there’s difference in the lower part of the pumper. Thank u Sent from my iPhone using Tapatalk
  9. Sport lower suspension (-30mm)

    Alfa 147, 156 & GT
    Hello my friends. I have 2.4jtd 156, can i use suspension kit from 2.0TS? Or its too heavy and etc.. Just asking, i can have it for good price brand new. Thanks
  10. Lower wishbones - TRW or Delphi

    Alfa GTA
    Hi, I am not impressed :( I fitted brand new OEM lower arms 3 years ago and the drivers side balljoint has already failed at only 20'000 miles despite not hitting any potholes ever on that corner. I have read some conflicting advise on which arms to fit. Many seem to think TRW (I am happy...
  11. Ball-joint collant - lower wishbone front

    Alfa 159, Brera & 946 Spider
    Today, whilst it must be hottest day of the year, I took the challenge of replacing a front wheel bearing+hub at the front. Prepared as I was, a.o. the great guide made by Chris_155 for this, I wasn't expecting that much issue losening the ball-joints (track-rod, upper and lower wishbone). I...
  12. Looking for front bumper lower grille (facelift) car part number

    Alfa Giulietta
    I know that the old grille car part numbers were 156090413 (right) and 156090415 (left). Unfortunately After spending few hours on the search, I wasn't able to find the part number for the new one (after the face-lift). After changing to the new grille (gqv 2010), the difference between the...
  13. Solid bushes lower wishbone for 156 GTA racer

    Tuning & Upgrades
    Hi people, I'm looking for a set of solid bushes/mounts for the lower whisbones for a 156 GTA racecar. NOT PU ones but the solid aluminum with brass bush ones. They replace the bushes that mount to the subframe. Does anyone know who makes them? I've seen them before on the internet but I can't...
  14. Tech help pls - lower ball joint boot.

    Alfa 159, Brera & 946 Spider
    Hi Need to replace the lower balljoint boots on the 2.4. Would be grateful for a quick tutorial on how it’s done and what size boots are required. Cheers.
  15. Do lower wishbones creak when they're shot at?

    Alfa 159, Brera & 946 Spider
    hi guys, nice easy one, do the lower wishbones creak loudly once they're done? I got in my Brera 2.4jtdm the other morning, and its developed a horrendous creaking (seemingly overnight?) when driving on bumpy roads, and when turning the wheels while stationary. I instantly thought wishbone...
  16. Lower on the drivers side 105 spider 1974

    The Classic Alfa Romeos
    Hi wonder if you can help. I have noticed that the car seems to be lower on the drivers side compared to the other side. What do you think this could be. I did have a new strap fitted on this side. Regards vincenzo
  17. trying to remove lower airbox pipe

    Alfa GTV & 916 Spider
    Hi all I am wanting to remove the lower airbox pipe that appears to go inner wheel arch lining on my phase 2 3.0 v6. I have tried removing it from above engine bay as where I am parked I cannot jack the car up unfortunately but the pipe has like push clips on top and bottom tried pushing these...
  18. Drive shaft issue when changing lower suspension arm

    Alfa 159, Brera & 946 Spider
    This weekend I have had to replace the offside lower suspension arm due to the ball joint failing the MOT. I did the nearside one a couple of years ago without issue. I managed to do the nearside without removing the Disc and Calliper so I thought using the same method would work on the offside...
  19. Bargain TRW lower arms

    Alfa 159, Brera & 946 Spider
    Hi All, I bought some lower arms from ebay seller Mister Auto last month - thought I'd got a bargain at £90 and £164 respectively - the parts are legitimate, arived in TRW bags, with literature etc - The list price on Mister Auto's website is £219 (each) -...
  20. Squealing from off lower right corner of the bumper/wheel

    Alfa GTA
    Hi, the 147 GTA I've just got developed a squeal which gets louder and higher pitched as the revs increase, the sound also changes as you move the steering wheel, I took it in to my local Alfa Romeo dealer who changed the alternator belt and pulley (£322) but it's still there, any suggestions...
Top