Alfa Romeo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 65 Results
  1. Alfa GTV & 916 Spider
    As these are (or should be!) packed with a good quantity of grey moly grease, it's difficult to find out what's where if you are doing this for the first time. I recently removed the driveshafts from the car, stripped and cleaned them, so I thought I would take some pics and compile a guide to...
  2. Alfa GTA
    Hi I have just completed a Timing belt, Idler and tension bearing change due to a Idler bearing Failure (apparently it was done 24000 km ago by the previous owner). I have purchase a complete set of cv joints for the car as I suspect the passenger side inner CV is a little noisy and when I...
  3. Alfa 164 & 166
    Does anybody know if the outer CV joints from an auto 3 litre 2001 166 will interchange with the ones from a 2001 3 litre GTV?
  4. Alfa 147, 156 & GT
    Hi y'all I've just replaced my front wheel bearings and broke some of the ball joint nuts while hammering those *******s apart. I bought some standard nuts in the hardwarestore (size m10(track rod) and m14(lower arm)) but they don't fit as the threads of these are to coarse. Does anyone know...
  5. Alfa 147, 156 & GT
    I've had the inner joints and track rod ends replaced on my GT Blackline, but now the locknut on the track rod end is touching the inner edge of the wheel on full lock - both sides. After a bit of investigation, we found that the previous track rod ends were about 20mm longer than the...
  6. Alfa 147, 156 & GT
    Soo, my car started shaking violently left-right and after a visit to the shop, I've had my two inner CV joints replaced. I find it odd that they both failed at the exact same time. I've been wondering, what could've ruined them, is there a component that ,if malfunctioning, can ruin the inner...
  7. Alfa 147, 156 & GT
    Thought i would list these as they are nearly just the price of gaiters . A complete cv joint with gaiter and clips £11.70 inc post with a 2 years warranty. I've bought 2 as i may as well replace the old ones as off the car...
  8. Alfa GTA
    Has anybody recently found a supplier of these items that knows the difference between a 147 GTA and all other forms of 147 and that a 156 GTA is also different? Has anybody also then bought and fitted the parts with no issues? Can anybody give me the definitive part number? A lot of...
  9. Alfa GTA
    I have an early 2003 147 GTA with 305mm front discs. Can anyone recommend where to buy CV Joints inner and outer. Mine are starting to click. I am shortly having my clutch replaced and it would be a good time to investigate the CV's.
  10. Alfa GTV & 916 Spider
    Need some help guys please on my v6 GTV. I'm looking for bolts to make the front camber adjustable ( the high tensile thinner ones with a built in cam ) and a couple of the rear adjustable ball joints . I've searched this forum but no decent info came up. any suggestions/preferred...
  11. Alfa 147, 156 & GT
    Hi can anyone give me names of auto breakers that have alfa 147 ball joints in stock many thanks. Shane.
  12. Alfa 147, 156 & GT
    Anyone know where to get CV joints for 3.2 v6? I ordered some from j&R but they're not right size. They want the number of splines to know if they can supply correct ones.i cant be bothered to strip one side down just to count them, lol.
  13. Alfa 159, Brera & Spider
    Hi guys, I had an advisory on the MOT for my front lower wishbone ball joints. My question is, can you press out the ball joints and replace them rather than changing the whole arm out? I'd rather do that and polybush the old arms whilst they're out and save some cash, especially as I need to...
  14. Alfa 147, 156 & GT
    Hi all. Just had my 147 MOT'd and it passed first time :thumbs: But i have one advisory which is "Play in inner steering rack joints" The tester said he would 100% of failed it, but the inner joints dont allow him to fail it on just them, he can only advise :confused: He went on to say they...
  15. Alfa GTV & 916 Spider
    Just failed MOT. I had some exhaust work done and new discs and a radiator At well-known Alfa place in North London. Figured they would pick up on anything, else, but no. Anyone know how difficult it is (expensive) to replace front ball joints. Adjustment of hand brake? Only 12% efficiency...
  16. Alfa GTV & 916 Spider
    Hi, Just discovered this weekend that my Drivers outer CV joint is completely knackered. Are all 2.0ts CV joints the same? The only place that stocks it - Eurocarparts - list it as "Abs = 0"?? To my knowledge there was never a GTV without ABS. Thanks all.
  17. South Africa
    Hi Guys It seems like the CV's are acting up and I was wondering how do you guys go about it, what has worked and is still working? I suppose Alfa can only sell the complete side shaft and I already used the bond on my house to pay for the MAF so other alternatives include: Having the CV...
  18. Alfa GTV & 916 Spider
    Can anyone help. Think my cv joints (though not sure which one) needs replacing. I've already changed the drivers side inner as the boot split but this didn't stop the knocking sound when turning at slow speed. But whilst I was there, the bolts were loose and after changing, could not torque...
  19. Alfashop
    We now have a new stock of TRW top wishbones for the Alfa 166 Please visit Alfa Shop - Alfa Romeo Parts and Service Philip:thumbs:
  20. Alfa 147, 156 & GT
    can anyone put my mind at rest and tell me that the gt 3.2 and the 147 3.2 gta use the same driveshafts or more so the wheel hub side cv joint is the same. thanks neil
1-20 of 65 Results