Alfa Romeo Forum banner
jack
1-20 of 114 Results
Advanced
  1. Alfa Giulia
    Best jack for my Guilia that doesnt involve super human strength????
  2. Alfa 147, 156 & GT
    My recently purchased GT has a full size spare wheel and a puncture compressor repair pump (with the slime stuff in it). I am guessing the pump was put in it to make it roadworthy. According to the owners manual the GT is only supposed to have a space saver wheel and jack/wheel brace etc. My...
  3. Alfa Giulietta
    What jacking points do you like to use on your Giulietta? About to do a brake change (as first job I'll have done on it) so interested in where you use. Thanks ? Paul
  4. Alfa MiTo
    What do you guys use that fits in the pinch weld jacking point in the really small area that isn't covered by the plastics? I'm thinking of something like these...
  5. Alfa Giulietta
    The weather is pretty grotty out there and having discovered my Giulietta has a puncture I need to use my scissor jack to change the rear wheel tomorrow; to drive to work on Monday and then on to a garage. Before darkness fell and taking several snaps with my mobile + flash I could not locate...
  6. Alfa Giulietta
    So after hours of googling and reading I'm not much closer to an satisfying answer regarding this. Obviously there's the jacking points on the pinch welded sills like on every car, which I would use for changing the tires if it wasn't for 1. I don't have the dangerous emergency scissor jack...
  7. Alfa 145 & 146
    Hi all, could anybody with a 146 (or maybe a 145) post a picture of how the jack, handle and spare are sitting in your boot? I just bought a 146 Ti as a mini restoration project and everything was just flung in loose. I can't figure out for the life of how it all locates properly. Thanks.
  8. Alfa 159, Brera & Spider
    Hi. I’ve searched and searched and seen quite a few topics on this subject but I’ve not been able to find a definitive answer or clear pics etc. I see that the square inserts at each corner are designed for the emergency scissor jack. I have read that people often use these points for other...
  9. Alfa 159, Brera & Spider
    Hi, I got myself a pair of sturdy custom made axle stands and i needed to fit the undertray. Wondering if the area marked by the blue arrow in the attached pics cand hold the wheight of the car on the stands, i know the best location is on the front subframe but the axle are too high to lift...
  10. Alfa 147, 156 & GT
    Are these any good? https://www.ebay.co.uk/itm/2-TON-TONNE-Heavy-Duty-Hydraulic-Bottle-Jack-Lifting-Stand-Car-Van-Boat-Caravan-/122356757345?_trksid=p5731.m3795 I keep a trolley jack in the boot of my car and am wondering if this is a lighter/more sensible option?
  11. Alfa GTA
    Alfa 147/156 GTA and GT 3.2 Owners and Parts for sale / on facebook all four sill covers items and all four jacking point covers 300 euros in case it helps someone
  12. Alfa GTV & 916 Spider
    How / where did these came attached to originally? Inside the spare tyre, under the cover ? A picture would be great :) Cheers
  13. Alfa MiTo
    I seem to have lost the jack crank handle - I think when I had a flat tyre and got a local garage out, but having rang them they say they don't have it. Does anyone know where I can get one, or have one they don't need? Many thanks for any help.
  14. Alfa Giulietta
    Evening all I was planning to change my gearbox oil tomorrow. Is there a good place to centrally lift the front of the car up so I can then secure with two axle stands (perhaps on the stud jacking points) afterwards? When I did my oil change, I found it awkward to jack and use axel stands one...
  15. Alfa MiTo
    Hello , i just saw in the engine compartment a jack (i think is ODB connector ) that has it's cap loosen. I tried to fit it back but could not do it. Can you help me , is there any trick to fit it ? (Attached the photo) Thank you
  16. Alfa GTV & 916 Spider
    Okay . . . so I need to change the brakes on my GTV, so I need to jack it up and put it on Jack stands. I can't get a trolly jack under it because of the Autodelta kit thats on it, and the fact its lowered. So a few questions: If I can get the car up using the normal jacking points and the...
  17. The Classic Alfa Romeos
    Could any one let me know which Battaini car jack would have been in a Spider s2? 1971... was it the claw feet or the square feet? A picture would be useful if any one can help> Thanks...
  18. Alfa Giulietta
    Hi. Sorry if this sounds ridiculous but has anyone any idea how to get the jack back in the container, once it has been taken out? It looks so simple but I can't for the life of me get it back in. Just wondering if there's a knack to it.
  19. Alfa 159, Brera & Spider
    Mine's gone missing, wondered if anyone knows where I can get ether a genuine one cheaper than from a dealer or a suitable alternative that'll fit in the tool tray. There's a couple of complete kits on ebay so that's always an option if I can't get just the jack.
  20. Alfa GTA
    In the boot of my 2003 147 GTA under the boot carpet I have a large polystyrene insert where the spare wheel would usually sit and in there I have just two items - the zipped Compressor and a small red plastic box with some wheel nuts in. I'm pretty sure I'm missing some items like the jack and...
1-20 of 114 Results
Top