Alfa Romeo Forum banner

interchangeable

  1. Are the 159 & GT plastic manifold interchangeable?

    Alfa 147, 156 & GT
    To minimise my GT’s time off the road I may have the chance of a 159 plastic inlet manifold which I will remove the swirl flaps and properly clean. My question is the compatibility of the 159 & GT units. Derek.
  2. 12V cam covers interchangeable??

    General Alfa Discussion
    Technical question for you all...... do all 12V cam covers fit all other 12V V6 engines??? Or can I fit the nice plainer clean looking early cam covers to the later engine???? To be more specific, will the plainer early covers fit a 2.0 Turbo block? Which is the same a 3.0 164 block on the...
  3. 147 GTA & 2.0 are parts interchangeable

    Alfa GTA
    Hi All i have a 147 2.0t-spark & a 147 GTA i would like to know if i can replace suspension parts from the T-spark to go onto the GTA. 1. lower control arm? 2. Is the alternator interchangeable? 3. shocks ?
  4. 164/166 interchangeable parts???

    Alfa 164 & 166
    Does any one here have a 166 and 164 that can tell mee if it is possible to change the 164 to a 166 suspension set up on the front with out changing the sub frame. Will the lower arms bolt to the same fixings as they look very close. ? I know there are some differences in the upper parts and...
  5. Interchangeable parts?

    Alfa GTV & 916 Spider
    Hello, Being a complete novice at anything alfa, i was wondering what parts from various other models are interchangeable? I own a 1999 GTV 2.0 and love her to bits, but a set of new wheels wouldn't go amiss! I was wondering if i can use parts from a 146/156? Also are all 2.0 Twin spark engines...
  6. 147 2001 1.6 and 2003 2.0 interchangeable parts

    Alfa 147, 156 & GT
    My son has a red 5 door 1.6 <60,000 miles now replaced with a 3 door 2003 2.0. While the 1.6 is drivable and reliable clutch and gearbox are suspect and now also on a "get you home" wheel / tyre. I don't know whether to sell as spares / repair or strip the mechanicals / usual wear parts as...
  7. 147 jtdm diesel injector interchangeable topcaps?

    Alfa 147, 156 & GT
    Hi guys, In the struggle to remove a very stubborn injector the plastic cap at the top got damaged...the injector itself is fine (being removed after cambelt failure) Does anyone know if the top caps are interchangeable between different injector types? Ie...there's an injector that I can get...
  8. 147 jtdm diesel injector interchangeable topcaps?

    Alfa 147, 156 & GT
    Hi guys, In the struggle to remove a very stubborn injector the plastic cap at the top got damaged...the injector itself is fine (being removed after cambelt failure) Does anyone know if the top caps are interchangeable between different injector types? Ie...there's an injector that I can get...
  9. Interchangeable parts

    Alfa 147, 156 & GT
    I have been running alfas and fiats for years and have often thought that the build quality and some parts are as good if not better on the fiat. My wife runs a grande punto sport and I have to say the leather steering wheel is far better than the one in my 156. So the question is, do you think...
  10. Interchangeable Part used in Alfa's

    South Africa
    :thumbs:I think a thread that list parts that are inter changeable between not only Alfa's but between Alfa's and other make could be useful. Here good my bit of info. I had to replace the CV boot on my 916 3.0 gtv today. The info that I could find stated that the outer cv was 85 mm Ø and the...
  11. Which engines are interchangeable - CF2 V6 GTV?

    Alfa GTV & 916 Spider
    Hello, I'd like to fully refurbish my engine and blueprint it, as seen on AlfaDax.com (brilliant website btw). The reason that I want to do the work is because, let's face it, I've done everything else and I may as well just get it to the stage where it will be one of the best GTVs around -...
  12. Alfa 33 S2 and S3 dashboards interchangeable?

    Alfa 33, Sud & Sprint
    Hello, Alfisti, Will an alfa 33 series 2 dashboard fit in a '92 series 3 ? Thank you.
  13. Are gear knobs interchangeable?

    Alfa 147, 156 & GT
    I've stopped looking for a stock 147 manual gear knob so looking for something else. Are most knobs interchangeable between manufacturers? If so, what looks good? After one with the 5 gear pattern. Cheers.
  14. 164 / 166 interchangeable parts

    Alfa 164 & 166
    Evening lads I was just wondering if there are common parts between the two cars namely a '91 164 8V TS and a 166 TS. I know of a chap breaking a 166 and I was wondering will the starter motor fit my 8V twinny? Also will the interior from a 166 fit my 164? Any advice is as always very much...
  15. 159 / Brera Wiper blades interchangeable?

    Alfa 159, Brera & 946 Spider
    Afternnon all, Need some new wiper blades on the front, looking at Bosch twin jobbies on ebay and the set for the 159 is £10 cheaper than the Brera set. Surely they are the same size/fitment? Any advice chaps Cheers MC
  16. 159/brera/spider Interchangeable parts

    Alfa 159, Brera & 946 Spider
    sorry for my english. i have alfa spider 946 after accident. without all electronic parts, hood, car interior and roof, but engine should work. and i can't find this parts for for my car. help me. may be some parts from 159 or brera can be usefull?
  17. 147 & 156 Suspension Interchangeable?

    Alfa 147, 156 & GT
    Just wondered if the shocks and springs for a 156 are interchangeable with a 147? Ta.
  18. Alfa 156 1.6 and 1.8 engine interchangeable?

    Engines (TS, JTS, JTD & V6)
    Hi, I have a 2001 1.6 Alfa 156 with a noisy top end, I have a 1999 1.8 156 and wondered if the heads are interchangeable and/or will the entire 1.8 engine fit the gearbox etc of the 1.6? Thanks in advance Maf
  19. are all 2.0 ts engines interchangeable?

    Engines (TS, JTS, JTD & V6)
    as above..picked up a nice gtv to add to me collection :lol: waterpumps gone and knackered the engine. so i'm wondering if i can use ,say a 145 cf2, or does it have to be one from a gtv?
  20. 2L and 3L gauges (ph1)... Interchangeable?

    Alfa GTV & 916 Spider
    I'm looking at buying a customised Ph2 dash for my Ph1, but the only thing is I have a 3L and the donor car is a 2L Ph1. I have been told that it's all been specially made up, so I am thinking I will need to keep the gauges that are in there. Does anyone know whether the two central gauge...
Top