injectors

Greetings ✌, I was doing a random check to my alfa romeo 159 using Alfa OBD. Just trying my new Obd link mx xD . During my random check i noticed something weird with my injector correction values . Basically the values are far from one another . Please find attached a picture also a screen...

Hi guys it's been awhile since I owned a Alfa ( 2007 Brera 2.4 jtdm 210bhp) but turns out this one I bought has some issues that I'm struggling with just wondering if anyone can shed any light. So current issues : Bad starting - fit new glow plugs didn't really make much difference I also do...

Hello, I am thinking of upgrading the stock 147 1.9 16v 150 HP injectors. Does anyone know if the injectors from the title (0445110682) that can be found on the giulietta 2.0 jtdm 175 HP are any good for upgrading? Some figures would also be useful :)

Hi guys, on facebook i saw a video from "Alex Performance". He fitted the 674s injectors in his 1.9 JTDm 16v and run it with 2500bar (upgraded pump off course). These injectors are used in the 2.2 Multijet in Alfa Giulia and Stelvio. What i know about these injectors: Bosch 0445110674 (or...

Hello, I'm Giuseppe from Italy (sorry for my english) and I have an Alfa Gt 1.9 Jtd Q2 150hp. At the end of this month I'll upgrade my car with a bigger diesel pump, big turbo and remap. Now the car have a free exhaust, front intercooler, big turbo (but I don't like it), no egr and remap. I...

Hi guys, id like to know what injectors i can fit to a 16v cf1 twinspark that the ECU would be happy to work with. Do v6 ones fit? The engine will getting turboed soon hence the injectors

Hi all, Can anyone help me trying to recode new injectors with multiecuscan registered version and elm 327 interface cable. When I enter the new code I get error message “Failed to execute, the interface does not support this operation” I think I need a KKL interface to do this. Can anyone...

I've managed to acquire a set of used injectors for my 1.9 jtdm for reasonable money. My plan is to get them reconditioned and tested and then swap them for my current injectors. Can anyone recommend some good places to get them reconditioned and tested?

Hi everyone, My 159 2.4 JTDM had been smelling pretty strongly of diesel the last week and finally started throwing up warnings (P0202 2nd injector issue), checked under the hood and the hose above the injectors appears to be leaking. Video of the issue: Any idea what this part is actually...

Hi guys Ive upgraded my cf3 2.5 v6 166 with the intake runners and baseplates from a 3.0. Also have a set of 3.0 beige cf2 injectors and rails at home Should I fit them, or will they make no diference? Regards.

SOLD I bought a new set of these thinking may be a good upgrade to a CF2 GTV and installed when doing cam shaft replacement etc. Anyhow after much looking into why my results were wrong (lower power bottom of rev range ) it turns out the CF3 injectors have a different spray pattern and not...

Hi I’ve removed my injectors to get them tested and noticed one of them is different to the rest. Does anyone know which is the correct one? I’ve currently got 4 of these 0445110 213_01 And 1 of these 0445110 308 I think my 2008 model has the 210hp / 154 kW engine. Thanks Brennan

Hello. I have a problem. My alfa 159 2.4 200hp has a really bad start. I figured out that this could be a faulty injector. I lookt how they work with multiecuscan. But sadly i‘m not quite shure wich is faulty. Maby someone out here could help me? I add pics (first pich.1-4injectors, pich. 2...

I was driving on B-roads, when my car cut out. No electrical power loss, but the engine stalled, causing me to lose brakes and power steering. The "check engine" light came on. I booked it into the garage, and the diagnostics came up with a glow plug error and an injector error. The garage...

Hi all, a big thanks to all who contributed to my previous thread. Following a cambelt replacement it's Good to know - > the compression test came up looking healthy @250-300 psi within a matter of seconds of cranking. > I found the fuel switch on the a-pillar under the glovebox. Pressing this...

Hello ! Fact : my '06 200hp injectors are going to "injector's paradise".... time to swap for something better. Right now I have a very good deal on brand-new and genuine Ducati Corse injectors. I don't aim to get crazy power levels... as my turbo will remain a garrett 2056 + extended tip...

Hi, one of my original injectors in my IMOLA failed and I curently don't have a spare one so I exchanged them with the ones from 16v boxer. [ yellow color ] All 4 just to give it a try and didn't expect much. The engine now has a better throttle response and perfect idle. The power doesn't...

Does any one know we're I can get uprated injectors for 1.9 v8 or what injectors I maybe able to use out of another car ?

Hi, i have a Fiat bravo 1.9 8v 120 2007, its the same engine as the 147jtdm 1.9 8v. i recently done a injector leak off test and i found two injectors leaking off too much but i was wondering whats the maximum amount of leak off in each injector? l really appreciate it i have attached a image...

GT JTDm Not starting after new injector seals Hi all Got 2 new problems today . 1) Exhaust fumes smell inside the car, so have ordered new injector seals, to see if that is the problem. 2) Very loud tapping noise from engine. I will take the aux belt off to check if its the alternator...