I found this listed on eBay and they say they will fit the latter 33 models with 3 holds top mount.
Can someone make sure for me if they will fit or if there is any way of putting them in my 33 Imola???
Has been a while since my last post, as I haven't used my 33 very often in the last 3 years...
Recently I'm experiencing some pinging at high revs above 4500 rpm...
Without the catalytic converter was a lot more noticeable, once I installed the cat (to pass the MOT), the pinging...
Hello everyone, from Barcelone, Spain. ( Sorry for my english )
I´m the new owner of Alfa 33 Imola 94, white colour, sharing garaje with Alfa 156 GTA.
many questions about this model , I will go over and read posts.
Has been a long time since my last post...
This time I lost the metal cap that keeps the grease for the wheel bearing...actually it flew away together with my Advanti Racing rims centre dust cap...while driving to the MOT.
So what is the dimension of the grease cap and where can I...
as you can see, few days ago me and my beloved 33 were involved in a car accident. Of course, as I was coming from behind, it was my fault for not keeping the right distance so I DIDN'T even get a cent from the insurance company... The stupid idiot in front of me was a female driving a...
And than again, once you service something, something else happens and you find yourself investing time, money and a lot of nerves on your boxer, and this thing goes on and on and on...:rolleyes:
But I think it's thanks to us that this cars are still on the roads after more than 20...
I got my fuel pump broken 300 km away from home, I'm on holly days in here. The fuel pump brought me here and died after. It sounds like it is seized, it started to make a different noise and also a repeating click noise. The engine failed few times or it could not start on ignition...
Yesterday I was changing oil and filters and my mechanic damaged the oil drain plug under the oil pan, so after putting new oil in, it started to leak...and is very damaged!
Would it be possible for you to try to find one for me guys.
Thanks in advance
im start a new proyect, one imola for track days and funny
is my firts car for "race",
i think in install rollbar, baquets, new belts,16v brakes,1,7 8v engine, one body kit etc
now im searching new springs, where think about this?:
Alfa Romeo Shop - Tuning, Styling, Fanartikel und...
For some of you, what I'm going to ask, might be an already known topic as I think this is a common fail for most of 33.
Straight to the problem:
I have noticed that my 33 and also my previous one, has always had bad braking ability at the rear axle. I have tried everything, new...
Hey lads, it's time to show you my neverending agony :thumbs: . I've started 33 project long ago and so far ... I've done nothing significant. In general my idea is to punish other projects or/and expensive powerful cars only with 1.7 non turbo engine. OK so ... In 2007 it was 1.3 LPG:
My 1993 Alfa 33 has developed a most annoying fault that manifests differently as follows;-
1. Starting very well but later the engine experiences a momentary hesitation
2. Some times you get a series of these momentary hesitations leading to jerking, which disappear either when you ease off...
Need to discus few things with you guys.
1. I replaced the clutch slave cylinder few days ago. When I push the clutch pedal first in the morning, it feels a lot hard to push down. After 3-4 pumps to the pedal gets as soft as normal and stays like that for all the time you...
Afternoon gents, as the title states I have a 1.6 engine from a 145 I have retained the ancillaries such as injectors an throttle butterfly etc.
My question is would I be able to put the 1.6 lump in and still use the 1.4 electronics, both engines run with the Weber IAW system. I dont have the...