I am on the look out for a set of rear hubs from a 3.0 V6 or GTV6 or maybe TS? as I am planning on fitting 5 bolt wheels to my 1975 Alfetta GT. I foolishly sold my Alfa 75 parts hoard a few years ago, and have since then bought another 116 chassis car - of course I guess this was...
I need to change the front hub on my 156 v6 and have a twin spark GTV which I'm in the process of breaking.
Can anyone tell me whether or not they share the same front wheel hubs as it seems a bit silly to buy a new one if I can steal one off the GTV?
So last week Gina started to feel a bit 'odd' on the back end I can't describe it really she just didn't feel right!
Fearing the worst I read through a few rear end posts here and decided that it could possibly be rear bearings! Only because some described their syptoms like passive rear wheel...
I could do with swapping my wheels front to back in the near future, and I'm thinking it might be an opportunity to tidy up the hubs on the rear discs, which are a bit unsightly with rust.
On the other hand, it's not beyond the realms of possibility that attempting to do so would lead to me...
Alfa Romeo Classifieds - Auctions - 18" Team Dynamics Pro Race 1.2 alloys & tyres - Powered by PhotoPost Classifieds
Got some lovely wheels for sale which will fit your Alfa Hubs if you have them fitted :)
Hi all, just wondering if anyone knows where to source a front wheel hub for the above?
Its a 1997 T.Spark with ABS, according to eper and other sources, the part number and part for the 164, is no longer available, but I have heard some say that the front wheel hub from a 155, 145 or 146 is in...
I have been searching the net for trailer hubs with a 5x98 or 100 stud pattern so i can make my trailer look sassy with some telledials.
Other than getting some blanks custom drilled can any one tell me where i might find them? or if there has already been a discussion on a thread i could read?
Im looking for technical help regarding front hubs on the GT, I am aware that the 156 and 147 share a lot of the same parts, but with out searching through part numbers does anybody know through experience if they are the same part. cheers lee
Just wondering if anyone would know. Im thinking of doing a stud conversion on my 155 i know how to do the back hubs. what i need to know is the fronts are same as gtv question is which will fit on my driveshafts the 2.0l hubs or 3.0l hubs any ideas?
OK, another dumb question from me.
Need to replace my old 1.1 USB Hub to USB 2.
There seems to be two types, the ones with a separate Power Supply and ones which are BUS powered. I'm :confused:, what are the practical differences ?
As I don't need to power anything from the Hub except for...
I need a pair of front hubs for a GTV V6
Its for a track car, so I am not worried about the ABS sensors working
So, anyone breaking a V6 GTV - I need a few other bits as well
Give me a call on 07802-748741
Have never had the misfortune of a flat tyre whilst away from home but recently started to get my alloys refurbished, removing one wheel at a time and taking to garage. I found when removing the bolts I couldn't release the wheel, had to go buy a rubber mallet. Useful discovery, shall...
OK, so im trying to find some alfa 5x98 hubs that i can adapt to fit onto my lancia delta HF turbo. I know Alfa GTV rear flange bearings will bolt straight onto the rear stub axles with only a -5mm offset (actually perfect for what i want.) I want to broaden my search for cheap 2nd hand though...
Have got a replacemnent S/H rear hub assemby for son's '99 2.0 GTV after finally realising the disk on the car was running way out of true - probably due to a bent stub axle.
It seems fine, is true and bearing runs smoothly - but has no grease packing.
QUESTION IS: Should the bearing be grease...
Okay so I picked some coil-overs up off of this great forum for decent money.
I have always run everyone of my cars low as can be and dont mind a spinebusting ride.
I have a GTV TS the coil-overs are designed for the V6 spring rates I have delt with.. harshness off the shock...
Can anyone tell me if you require GTA track rods when fitting GTA hubs and calipers to a GT Diesel?
I had been told the GTA upright just needed GT bearings fitted and it should fit straight on?
Any advice is welcome.